PyWebIO¶

PyWebIO مجموعه ای از توابع دستوری را برای به دست آوردن ورودی کاربر و خروجی دادن محتوا روی مرورگر را ارائه می کند، تبدیل مرورگر به یک «ترمینال متن غنی»، و می تواند برای ساخت وب اپلیکیشن های ساده یا اپلیکیشن های دارای رابط کاربری گرافیکی مبتنی بر مرورگر استفاده شود. با استفاده از PyWebIO، توسعه دهندگان می توانند اپلیکیشن ها را درست مثل نوشتن اسکریپت های ترمینال (تعامل بر پایه تابع Input و Print) بنویسند، بدون نیاز به داشتن دانش HTML و جاوا اسکریپت. PyWebIO برای ساخت سریع اپلیکیشن های تعاملی که یک رابط کاربری پیچیده نیاز ندارند ایده آل است.

ویژگی ها¶

استفاده از همگام سازی بجای متد مبتنی بر فراخوانی برای دریافت ورودی
چیدمان Non-declarative، ساده و کارآمد
کمتر مزاحم: کد اسکریپت قدیم می تواند به یک وب سرویس تبدیل شود فقط با اصلاح عملیات ورودی و خروجی
پشتیبانی از ادغام با وب سرویس های موجود، در حال حاضر پشتیبانی از Flask, Django, Tornado, aiohttp و فریم ورک FastAPI(Starlette)
پشتیبانی برای asyncio و coroutine
پشتیبانی از بصری سازی داده با کتابخانه های شخص ثالث

نصب¶

نسخه پایدار:

pip3 install -U pywebio

نسخه توسعه:

pip3 install -U https://github.com/pywebio/PyWebIO/archive/dev-release.zip

پیش نیاز ها: PyWebIO به Python 3.5.2 یا جدید تر نیاز دارد

سلام، دنیا¶

در اینجا یک اسکریپت PyWebIO ساده برای محاسبه شاخص توده بدنی آورده شده است:

# یک اسکریپت ساده برای محاسبه شاخص توده بدنی
from pywebio.input import input, FLOAT
from pywebio.output import put_text

def bmi():
    height = input("قد خود را وارد کنید(سانتی متر)：", type=FLOAT)
    weight = input("وزن خود را وارد کنید(کیلوگرم)：", type=FLOAT)

    BMI = weight / (height / 100) ** 2

    top_status = [(16, 'کمبود وزن شدید'), (18.5, 'کمبود وزن'),
                  (25, 'عادی'), (30, 'اضافه وزن'),
                  (35, 'چاق متوسط'), (float('inf'), 'چاق شدید')]

    for top, status in top_status:
        if BMI <= top:
            put_text('شاخص توده بدنی شما: %.1f. دسته بندی: %s' % (BMI, status))
            break

if __name__ == '__main__':
    bmi()

این فقط یک اسکریپت خیلی ساده است اگه شما PyWebIO را نادیده بگیرید، اما بعد از استفاده از توابع ورودی و خروجی ارائه شده توسط PyWebIO، شما می توانید با کد در مرورگر تعامل برقرار کنید:

در آخرین خط کد بالا، تغییر فراخوانی تابع bmi() به pywebio.start_server(bmi, port=80) یک وب سرویس شاخص توده بدنی را روی پورت 80 راه اندازی می کند ( دمو آنلاین ).

اگر شما می خواهید که سرویس bmi() را با یک وب فریم ورک موجود ادغام کنید، می توانید بخش Integration with a web framework این مستندات را ببینید.

مستندات¶

این مستندات همچنین در فرمت های PDF و Epub در دسترس است.

راهنمای کاربر¶

اگر شما با توسعه وب آشنایی دارید، ممکن است که به استفاده از PyWebIO که در زیر توضیح داده شده عادت نداشته باشید، که از الگو توسعه وب سنتی که بک اند API را پیاده سازی و فرانت اند محتوا را نمایش می دهد متفاوت است. در PyWebIO، شما فقط نیاز دارید که به پایتون کد بنویسید.

در واقع، نحوه نوشتن اپلیکیشن های PyWebIO بیشتر شبیه نوشتن یک برنامه کنسول است، بجز اینکه ترمینال در اینجا تبدیل به یک مرورگر می شود. با استفاده از API دستوری ارائه شده توسط PyWebIO، شما می توانید به راحتی put_text(), put_image(), put_table() و توابع دیگر را برای خروجی دادن متن، تصاویر، جداول و محتوا های دیگر به مرورگر فراخوانی کنید یا شما می توانید برخی توابع مانند input(), select(), file_upload() را برای نمایش فرم های متفاوت روی مرورگر برای دریافت ورودی کاربر فراخوانی کنید. علاوه بر این، PyWebIO همچنین پشتیبانی برای رویداد های کلیک، چیدمان، و... را ارائه می دهد. PyWebIO هدف دارد تا به شما اجازه دهد که از کمترین کد برای تعامل با کاربر استفاده کنید و یک تجربه کاربری خوب را تا حد امکان ارائه دهید.

این راهنمای کاربر بیشتر ویژگی های PyWebIO را به شما معرفی می کند. یک لینک دمو در بالا سمت راست کد های مثال در این مستندات وجود دارد، جایی که شما می توانید کد مثال را به طور آنلاین اجرا کنید و ببینید که چه اتفاقی می افتد.

ورودی¶

The input functions are defined in the pywebio.input module and can be imported using from pywebio.input import *.

When calling the input function, an input form will be popped up on the browser. PyWebIO's input functions is blocking (same as Python's built-in input() function) and will not return until the form is successfully submitted.

ورودی پایه¶

در اینجا برخی از انواع پایه ورودی آورده شده.

ورودی متن:

age = input("How old are you?", type=NUMBER)

After running the above code, the browser will pop up a text input field to get the input. After the user completes the input and submits the form, the function returns the value entered by the user.

در اینجا برخی از انواع دیگر توابع ورودی آورده شده:

# Password input
password = input("Input password", type=PASSWORD)

# Drop-down selection
gift = select('Which gift you want?', ['keyboard', 'ipad'])

# Checkbox
agree = checkbox("User Term", options=['I agree to terms and conditions'])

# Single choice
answer = radio("Choose one", options=['A', 'B', 'C', 'D'])

# Multi-line text input
text = textarea('Text Area', rows=3, placeholder='Some text')

# File Upload
img = file_upload("Select a image:", accept="image/*")

پارامتر توابع ورودی¶

There are many parameters that can be passed to the input function(for complete parameters, please refer to the function document):

input('این لیبل است', type=TEXT, placeholder='این placeholder است',
        help_text='این help text است', required=True)

نتایج مثال بالا به شرح زیر است:

You can specify a validation function for the input by using validate parameter. The validation function should return None when the check passes, otherwise an error message will be returned:

def check_age(p):  # return None when the check passes, otherwise return the error message
    if p < 10:
        return 'Too young!!'
    if p > 60:
        return 'Too old!!'

age = input("How old are you?", type=NUMBER, validate=check_age)

When the user input an illegal value, the input field is displayed as follows:

You can use code parameter in pywebio.input.textarea() to make a code editing textarea.

code = textarea('Code Edit', code={
    'mode': "python",
    'theme': 'darcula',
}, value='import something\n# Write your python code')

نتایج مثال بالا به شرح زیر است:

گروه ورودی¶

PyWebIO uses input group to get multiple inputs in a single form. pywebio.input.input_group() accepts a list of single input function call as parameter, and returns a dictionary with the name of the single input as its key and the input data as its value:

data = input_group("Basic info",[
  input('Input your name', name='name'),
  input('Input your age', name='age', type=NUMBER, validate=check_age)
])
put_text(data['name'], data['age'])

The input group also supports using validate parameter to set the validation function, which accepts the entire form data as parameter:

def check_form(data):  # return (input name, error msg) when validation fail
    if len(data['name']) > 6:
        return ('name', 'Name too long!')
    if data['age'] <= 0:
        return ('age', 'Age can not be negative!')

دقت

PyWebIO determines whether the input function is in input_group() or is called alone according to whether the name parameter is passed. So when calling an input function alone, do not set the name parameter; when calling the input function in input_group(), you must provide the name parameter.

خروجی¶

The output functions are all defined in the pywebio.output module and can be imported using from pywebio.output import *.

When output functions is called, the content will be output to the browser in real time. The output functions can be called at any time during the application lifetime.

خروجی پایه¶

Using output functions, you can output a variety of content, such as text, tables, images and so on:

# Text Output
put_text("Hello world!")

# Table Output
put_table([
    ['Commodity', 'Price'],
    ['Apple', '5.5'],
    ['Banana', '7'],
])

# Image Output
put_image(open('/path/to/some/image.png', 'rb').read())  # local image 
put_image('http://example.com/some-image.png')  # internet image 

# Markdown Output
put_markdown('~~Strikethrough~~')

# File Output
put_file('hello_word.txt', b'hello word!')

# Show a PopUp
popup('popup title', 'popup text content')

# Show a notification message
toast('New message 🔔')

For all output functions provided by PyWebIO, please refer to the pywebio.output module. In addition, PyWebIO also supports data visualization with some third-party libraries, see Third-party library ecology.

توجه

If you use PyWebIO in interactive execution environment of Python shell, IPython or jupyter notebook, you need call show() method explicitly to show output:

>>> put_text("Hello world!").show()
>>> put_table([
...     ['A', 'B'],
...     [put_markdown(...), put_text('C')]
... ]).show()

خروجی ترکیبی¶

The output functions whose name starts with put_ can be combined with some output functions as part of the final output:

You can pass put_xxx() calls to put_table() as cell content:

put_table([
    ['Type', 'Content'],
    ['html', put_html('X<sup>2</sup>')],
    ['text', '<hr/>'],  # equal to ['text', put_text('<hr/>')]
    ['buttons', put_buttons(['A', 'B'], onclick=...)],  
    ['markdown', put_markdown('`Awesome PyWebIO!`')],
    ['file', put_file('hello.text', b'hello world')],
    ['table', put_table([['A', 'B'], ['C', 'D']])]
])

نتایج مثال بالا به شرح زیر است:

Similarly, you can pass put_xxx() calls to popup() as the popup content:

In addition, you can use put_widget() to make your own output widgets that can accept put_xxx() calls.

For a full list of functions that accept put_xxx() calls as content, see Output functions list

Context Manager

Some output functions that accept put_xxx() calls as content can be used as context manager:

with put_collapse('This is title'):
    for i in range(4):
        put_text(i)

    put_table([
        ['Commodity', 'Price'],
        ['Apple', '5.5'],
        ['Banana', '7'],
    ])

For a full list of functions that support context manager, see Output functions list

فراخوانی کلیک¶

As we can see from the above, the interaction of PyWebIO has two parts: input and output. The input function of PyWebIO is blocking, a form will be displayed on the user's web browser when calling input function, the input function will not return until the user submits the form. The output function is used to output content to the browser in real time. The input and output behavior of PyWebIO is consistent with the console program. That's why we say PyWebIO turning the browser into a "rich text terminal". So you can write PyWebIO applications in script programming way.

In addition, PyWebIO also supports event callbacks: PyWebIO allows you to output some buttons and bind callbacks to them. The provided callback function will be executed when the button is clicked.

این یک مثال است:

from functools import partial

def edit_row(choice, row):
    put_text("You click %s button ar row %s" % (choice, row))

put_table([
    ['Idx', 'Actions'],
    [1, put_buttons(['edit', 'delete'], onclick=partial(edit_row, row=1))],
    [2, put_buttons(['edit', 'delete'], onclick=partial(edit_row, row=2))],
    [3, put_buttons(['edit', 'delete'], onclick=partial(edit_row, row=3))],
])

The call to put_table() will not block. When user clicks a button, the corresponding callback function will be invoked:

Of course, PyWebIO also supports outputting individual button:

def btn_click(btn_val):
    put_text("You click %s button" % btn_val)

put_buttons(['A', 'B', 'C'], onclick=btn_click)  # a group of buttons

put_button("Click me", onclick=lambda: toast("Clicked"))  # single button

In fact, all output can be bound to click events, not just buttons. You can call onclick() method after the output function (function name like put_xxx()) call:

put_image('some-image.png').onclick(lambda: toast('You click an image'))  

# set onclick in combined output
put_table([
    ['Commodity', 'Price'],
    ['Apple', put_text('5.5').onclick(lambda: toast('You click the text'))],
])

The return value of onclick() method is the object itself so it can be used in combined output.

محدوده خروجی¶

PyWebIO uses the scope model to give more control to the location of content output. The output scope is a container of output content. You can create a scope in somewhere and append content to it.

Each output function (function name like put_xxx()) will output its content to a scope, the default is "current scope". The "current scope" is set by use_scope().

use_scope()

You can use use_scope() to open and enter a new output scope, or enter an existing output scope:

with use_scope('scope1'):  # open and enter a new output: 'scope1'
    put_text('text1 in scope1')  # output text to scope1

put_text('text in parent scope of scope1')  # output text to ROOT scope

with use_scope('scope1'):  # enter an existing scope: 'scope1'
    put_text('text2 in scope1')  # output text to scope1

نتایج کد بالا به شرح زیر است:

text1 in scope1
text2 in scope1
text in parent scope of scope1

You can use clear parameter in use_scope() to clear the existing content before entering the scope:

with use_scope('scope2'):
    put_text('create scope2')

put_text('text in parent scope of scope2')

with use_scope('scope2', clear=True):  # enter the existing scope and clear the previous content
    put_text('text in scope2')

نتایج کد بالا به شرح زیر است:

text in scope2
text in parent scope of scope2

use_scope() can also be used as decorator:

from datetime import datetime

@use_scope('time', clear=True)
def show_time():
    put_text(datetime.now())

When calling show_time() for the first time, a time scope will be created, and the current time will be output to it. And then every time the show_time() is called, the new content will replace the previous content.

Scopes can be nested. At the beginning, PyWebIO applications have only one ROOT scope. You can create new scope in a scope. For example, the following code will create 3 scopes:

with use_scope('A'):
    put_text('Text in scope A')

    with use_scope('B'):
        put_text('Text in scope B')

with use_scope('C'):
    put_text('Text in scope C')

The above code will generate the following scope layout:

┌─ROOT────────────────────┐
│                         │
│ ┌─A───────────────────┐ │
│ │ Text in scope A     │ │
│ │ ┌─B───────────────┐ │ │
│ │ │ Text in scope B │ │ │
│ │ └─────────────────┘ │ │
│ └─────────────────────┘ │
│                         │
│ ┌─C───────────────────┐ │
│ │ Text in scope C     │ │
│ └─────────────────────┘ │
└─────────────────────────┘

put_scope()

We already know that the scope is a container of output content. So can we use this container as a sub-item of a output (like, set a cell in table as a container)? Yes, you can use put_scope() to create a scope explicitly. The function name starts with put_, which means it can be pass to the functions that accept put_xxx() calls.

put_table([
    ['Name', 'Hobbies'],
    ['Tom', put_scope('hobby', content=put_text('Coding'))]  # hobby is initialized to coding
])

with use_scope('hobby', clear=True):
    put_text('Movie')  # hobby is reset to Movie

# append Music, Drama to hobby
with use_scope('hobby'):
    put_text('Music')
    put_text('Drama')

# insert the Coding into the top of the hobby
put_markdown('**Coding**', scope='hobby', position=0)

ملاحظه

It is not allowed to have two scopes with the same name in the application.

Scope control

In addition to use_scope() and put_scope(), PyWebIO also provides the following scope control functions:

clear(scope) : Clear the contents of the scope
remove(scope) : Remove scope
scroll_to(scope) : Scroll the page to the scope

Also, all output functions (function name like put_xxx()) support a scope parameter to specify the destination scope to output, and support a position parameter to specify the insert position in target scope. Refer output module for more information.

چیدمان¶

In general, using the output functions introduced above is enough to output what you want, but these outputs are arranged vertically. If you want to create a more complex layout (such as displaying a code block on the left side of the page and an image on the right), you need to use layout functions.

The pywebio.output module provides 3 layout functions, and you can create complex layouts by combining them:

put_row() : Use row layout to output content. The content is arranged horizontally
put_column() : Use column layout to output content. The content is arranged vertically
put_grid() : Output content using grid layout

Here is an example by combining put_row() and put_column():

put_row([
    put_column([
        put_code('A'),
        put_row([
            put_code('B1'), None,  # None represents the space between the output
            put_code('B2'), None,
            put_code('B3'),
        ]),
        put_code('C'),
    ]), None,
    put_code('D'), None,
    put_code('E')
])

نتایج مثال بالا به شرح زیر است:

The layout function also supports customizing the size of each part:

put_row([put_image(...), put_image(...)], size='40% 60%')  # The ratio of the width of two images is 2:3

For more information, please refer to the layout functions documentation.

استایل¶

If you are familiar with CSS styles, you can use the style() method of output return to set a custom style for the output.

You can set the CSS style for a single put_xxx() output:

put_text('hello').style('color: red; font-size: 20px')

# in combined output
put_row([
    put_text('hello').style('color: red'),
    put_markdown('markdown')
]).style('margin-top: 20px')

The return value of style() method is the object itself so it can be used in combined output.

اجرای اپلیکیشن¶

In PyWebIO, there are two modes to run PyWebIO applications: running as a script and using pywebio.start_server() or pywebio.platform.path_deploy() to run as a web service.

بررسی اجمالی¶

حالت سرور

In server mode, PyWebIO will start a web server to continuously provide services. When the user accesses the service address, PyWebIO will open a new session and run PyWebIO application in it.

start_server() is the most common way to start a web server to serve given PyWebIO applications:

from pywebio import *

def main():  # PyWebIO application function
    name = input.input("what's your name")
    output.put_text("hello", name)

start_server(main, port=8080, debug=True)

Now head over to http://127.0.0.1:8080/, and you should see your hello greeting.

By using debug=True to enable debug mode, the server will automatically reload if code changes.

The start_server() provide a remote access support, when enabled (by passing remote_access=True to start_server()), you will get a public, shareable address for the current application, others can access your application in their browser via this address. Because the processing happens on your device (as long as your device stays on!), you don't have to worry about any dependencies. Using remote access makes it easy to temporarily share the application with others.

Another way to deploy PyWebIO application as web service is using path_deploy(). path_deploy() is used to deploy the PyWebIO applications from a directory. Just define PyWebIO applications in python files under this directory, and you can access them via the path in the URL. Refer to platform module for more information.

دقت

Note that in Server mode, all functions from pywebio.input, pywebio.output and pywebio.session modules can only be called in the context of PyWebIO application functions. For example, the following code is not allowed:

import pywebio
from pywebio.input import input

port = input('Input port number:')   # ❌ error
pywebio.start_server(my_task_func, port=int(port))

حالت اسکریپت

If you never call start_server() or path_deploy() in your code, then you are running PyWebIO application as script mode.

In script mode, a web browser page will be open automatically when running to the first call to PyWebIO interactive functions, and all subsequent PyWebIO interactions will take place on this page. When the script exit, the page will be inactive.

If the user closes the browser before the script exiting, then subsequent calls to PyWebIO's interactive functions will cause a SessionException exception.

هم زمان¶

PyWebIO can be used in a multi-threading environment.

حالت اسکریپت

In script mode, you can freely start new thread and call PyWebIO interactive functions in it. When all non-daemonic threads finish running, the script exits.

حالت سرور

In server mode, if you need to use PyWebIO interactive functions in new thread, you need to use pywebio.session.register_thread(thread) to register the new thread (so that PyWebIO can know which session the thread belongs to). If the PyWebIO interactive function is not used in the new thread, no registration is required. Threads that are not registered with register_thread(thread) calling PyWebIO's interactive functions will cause SessionNotFoundException.

Example of using multi-threading in Server mode:

def show_time():
    while True:
        with use_scope(name='time', clear=True):
            put_text(datetime.datetime.now())
            time.sleep(1)

def app():
    t = threading.Thread(target=show_time)
    register_thread(t)
    put_markdown('## Clock')
    t.start()  # run `show_time()` in background

    # ❌ this thread will cause `SessionNotFoundException`
    threading.Thread(target=show_time).start()

    put_text('Background task started.')


start_server(app, port=8080, debug=True)

Close of session¶

When user close the browser page, the session will be closed. After the browser page is closed, PyWebIO input function calls that have not yet returned in the current session will cause SessionClosedException, and subsequent calls to PyWebIO interactive functions will cause SessionNotFoundException or SessionClosedException.

In most cases, you don't need to catch those exceptions, because let those exceptions to abort the running is the right way to exit.

You can use pywebio.session.defer_call(func) to set the function to be called when the session closes. defer_call(func) can be used for resource cleaning. You can call defer_call(func) multiple times in the session, and the set functions will be executed sequentially after the session closes.

اطلاعات بیشتر درباره PyWebIO¶

By now, you already get the most important features of PyWebIO and can start to write awesome PyWebIO applications. However, there are some other useful features we don't cover in the above. Here we just make a briefly explain about them. When you need them in your application, you can refer to their document.

Also, here is a cookbook where you can find some useful code snippets for your PyWebIO application.

ماژول `session`¶

The pywebio.session module give you more control to session.

Use set_env() to configure the title, page appearance, input panel and so on for current session.

The info object provides a lot information about the current session, such as the user IP address, user language and user browser information.

local is a session-local storage, it used to save data whose values are session specific.

run_js() let you execute JavaScript code in user's browser, and eval_js() let you execute JavaScript expression and get the value of it.

ماژول `pin`¶

As you already know, the input function of PyWebIO is blocking and the input form will be destroyed after successful submission. In some cases, you may want to make the input form not disappear after submission, and can continue to receive input. So PyWebIO provides the pywebio.pin module to achieve persistent input by pinning input widgets to the page.

ماژول `platform`¶

The pywebio.platform module provides support for deploying PyWebIO applications in different ways.

There are two protocols (WebSocket and HTTP) can be used in server to communicates with the browser. The WebSocket is used by default. If you want to use HTTP protocol, you can choose other start_server() functions in this module.

You might want to set some web page related configuration (such as SEO information, js and css injection) for your PyWebIO application, pywebio.config() can be helpful.

ویژگی های پیشرفته¶

The PyWebIO application can be integrated into an existing Python web project, the PyWebIO application and the web project share a web framework. Refer to Advanced Topic: Integration with Web Framework for more information.

PyWebIO also provides support for coroutine-based sessions. Refer to Advanced Topic: Coroutine-based session for more information.

If you try to bundles your PyWebIO application into a stand-alone executable file, to make users can run the application without installing a Python interpreter or any modules, you might want to refer to Libraries support: Build stand-alone App

If you want to make some data visualization in your PyWebIO application, you can't miss Libraries support: Data visualization

آخرین اما نه کم اهمیت ترین¶

This is basically all features of PyWebIO, you can continue to read the rest of the documents, or start writing your PyWebIO applications now.

Finally, please allow me to provide one more suggestion. When you encounter a design problem when using PyWebIO, you can ask yourself a question: What would I do if it is in a terminal program? If you already have the answer, it can be done in the same way with PyWebIO. If the problem persists or the solution is not good enough, you can consider the callback mechanism or pin module.

خیلی خب، با PyWebIO اوقات خوشی را داشته باشید!

`pywebio.input` --- دریافت ورودی از مرورگر وب¶

This module provides functions to get all kinds of input of user from the browser

There are two ways to use the input functions, one is to call the input function alone to get a single input:

name = input("What's your name")
print("Your name is %s" % name)

The other is to use input_group to get multiple inputs at once:

info = input_group("User info",[
  input('Input your name', name='name'),
  input('Input your age', name='age', type=NUMBER)
])
print(info['name'], info['age'])

When use input_group, you needs to provide the name parameter in each input function to identify the input items in the result.

توجه

PyWebIO determines whether the input function is in input_group or is called alone according to whether the name parameter is passed. So when calling an input function alone, do not set the name parameter; when calling the input function in input_group, you must provide the name parameter.

By default, the user can submit empty input value. If the user must provide a non-empty input value, you need to pass required=True to the input function (some input functions do not support the required parameter)

The input functions in this module is blocking, and the input form will be destroyed after successful submission. If you want the form to always be displayed on the page and receive input continuously, you can consider the pin module.

لیست توابع¶

Function name	Description
`input`	Text input
`textarea`	Multi-line text input
`select`	Drop-down selection
`checkbox`	Checkbox
`radio`	Radio
`slider`	Slider
`actions`	Actions selection
`file_upload`	File uploading
`input_group`	Input group
`input_update`	Update input item

مستندات توابع¶

pywebio.input.input(label='', type='text', *, validate=None, name=None, value=None, action=None, onchange=None, placeholder=None, required=None, readonly=None, datalist=None, help_text=None, **other_html_attrs)[source]¶

Text input

پارامترها

label (str) -- Label of input field.
type (str) --
Input type. Currently, supported types are：TEXT , NUMBER , FLOAT , PASSWORD , URL , DATE , TIME, COLOR, DATETIME_LOCAL

Note that DATE and TIME type are not supported on some browsers, for details see https://developer.mozilla.org/en-US/docs/Web/HTML/Element/input#Browser_compatibility
validate (callable) --
Input value validation function. If provided, the validation function will be called when user completes the input field or submits the form.

validate receives the input value as a parameter. When the input value is valid, it returns None. When the input value is invalid, it returns an error message string. For example:
```
def check_age(age):
    if age>30:
        return 'Too old'
    elif age<10:
        return 'Too young'
input('Input your age', type=NUMBER, validate=check_age)
```
name (str) -- A string specifying a name for the input. Used with input_group() to identify different input items in the results of the input group. If call the input function alone, this parameter can not be set!
value (str) -- The initial value of the input
action (tuple(label:str, callback:callable)) --
Put a button on the right side of the input field, and user can click the button to set the value for the input.

label is the label of the button, and callback is the callback function to set the input value when clicked.

The callback is invoked with one argument, the set_value. set_value is a callable object, which is invoked with one or two arguments. You can use set_value to set the value for the input.

set_value can be invoked with one argument: set_value(value:str). The value parameter is the value to be set for the input.

set_value can be invoked with two arguments: set_value(value:any, label:str). Each arguments are described as follows:
- value : The real value of the input, can be any object. it will not be passed to the user browser.
- label : The text displayed to the user
When calling set_value with two arguments, the input item in web page will become read-only.

The usage scenario of set_value(value:any, label:str) is: You need to dynamically generate the value of the input in the callback, and hope that the result displayed to the user is different from the actual submitted data (for example, result displayed to the user can be some user-friendly texts, and the value of the input can be objects that are easier to process)

Usage example:
```
import time
def set_now_ts(set_value):
    set_value(int(time.time()))

ts = input('Timestamp', type=NUMBER, action=('Now', set_now_ts))
from datetime import date,timedelta
def select_date(set_value):
    with popup('Select Date'):
        put_buttons(['Today'], onclick=[lambda: set_value(date.today(), 'Today')])
        put_buttons(['Yesterday'], onclick=[lambda: set_value(date.today() - timedelta(days=1), 'Yesterday')])

d = input('Date', action=('Select', select_date), readonly=True)
put_text(type(d), d)
```
Note: When using Coroutine-based session implementation, the callback function can be a coroutine function.
onchange (callable) --
A callback function which will be called when user change the value of this input field.

The onchange callback is invoked with one argument, the current value of input field. A typical usage scenario of onchange is to update other input item by using input_update()
placeholder (str) -- A hint to the user of what can be entered in the input. It will appear in the input field when it has no value set.
required (bool) -- Whether a value is required for the input to be submittable, default is False
readonly (bool) -- Whether the value is readonly(not editable)
datalist (list) -- A list of predefined values to suggest to the user for this input. Can only be used when type=TEXT
help_text (str) -- Help text for the input. The text will be displayed below the input field with small font
other_html_attrs -- Additional html attributes added to the input element. reference: https://developer.mozilla.org/zh-CN/docs/Web/HTML/Element/input#%E5%B1%9E%E6%80%A7

Returns

The value that user input.

pywebio.input.textarea(label='', *, rows=6, code=None, maxlength=None, minlength=None, validate=None, name=None, value=None, onchange=None, placeholder=None, required=None, readonly=None, help_text=None, **other_html_attrs)[source]¶

Text input area (multi-line text input)

پارامترها

rows (int) -- The number of visible text lines for the input area. Scroll bar will be used when content exceeds.
maxlength (int) -- The maximum number of characters (UTF-16 code units) that the user can enter. If this value isn't specified, the user can enter an unlimited number of characters.
minlength (int) -- The minimum number of characters (UTF-16 code units) required that the user should enter.
code (dict/bool) --
Enable a code style editor by providing the Codemirror options:
```
res = textarea('Text area', code={
    'mode': "python",
    'theme': 'darcula'
})
```
You can simply use code={} or code=True to enable code style editor. You can use Esc or F11 to toggle fullscreen of code style textarea.

Some commonly used Codemirror options are listed here.
label, validate, name, value, onchange, placeholder, required, readonly, help_text, other_html_attrs (-) -- Those arguments have the same meaning as for input()

Returns

The string value that user input.

pywebio.input.select(label='', options=None, *, multiple=None, validate=None, name=None, value=None, onchange=None, required=None, help_text=None, **other_html_attrs)[source]¶

Drop-down selection

By default, only one option can be selected at a time, you can set multiple parameter to enable multiple selection.

پارامترها

options (list) --
list of options. The available formats of the list items are:
- dict:
```
{
    "label":(str) option label,
    "value":(object) option value,
    "selected":(bool, optional) whether the option is initially selected,
    "disabled":(bool, optional) whether the option is initially disabled
}
```
- tuple or list: (label, value, [selected,] [disabled])
- single value: label and value of option use the same value
Attention：
1. The value of option can be any JSON serializable object
2. If the multiple is not True, the list of options can only have one selected item at most.
multiple (bool) -- whether multiple options can be selected
value (list or str) -- The value of the initial selected item. When multiple=True, value must be a list. You can also set the initial selected option by setting the selected field in the options list item.
required (bool) -- Whether to select at least one item, only available when multiple=True
label, validate, name, onchange, help_text, other_html_attrs (-) -- Those arguments have the same meaning as for input()

Returns

If multiple=True, return a list of the values in the options selected by the user; otherwise, return the single value selected by the user.

pywebio.input.checkbox(label='', options=None, *, inline=None, validate=None, name=None, value=None, onchange=None, help_text=None, **other_html_attrs)[source]¶

A group of check box that allowing single values to be selected/deselected.

پارامترها

options (list) -- List of options. The format is the same as the options parameter of the select() function
inline (bool) -- Whether to display the options on one line. Default is False
value (list) -- The value list of the initial selected items. You can also set the initial selected option by setting the selected field in the options list item.
label, validate, name, onchange, help_text, other_html_attrs (-) -- Those arguments have the same meaning as for input()

Returns

A list of the values in the options selected by the user

pywebio.input.radio(label='', options=None, *, inline=None, validate=None, name=None, value=None, onchange=None, required=None, help_text=None, **other_html_attrs)[source]¶

A group of radio button. Only a single button can be selected.

پارامترها

options (list) -- List of options. The format is the same as the options parameter of the select() function
inline (bool) -- Whether to display the options on one line. Default is False
value (str) -- The value of the initial selected items. You can also set the initial selected option by setting the selected field in the options list item.
required (bool) -- whether to must select one option. (the user can select nothing option by default)
label, validate, name, onchange, help_text, other_html_attrs (-) -- Those arguments have the same meaning as for input()

Returns

The value of the option selected by the user, if the user does not select any value, return None

pywebio.input.actions(label='', buttons=None, name=None, help_text=None)[source]¶

Actions selection

It is displayed as a group of buttons on the page. After the user clicks the button of it, it will behave differently depending on the type of the button.

پارامترها

buttons (list) --
list of buttons. The available formats of the list items are:
- dict:
  { "label":(str) button label, "value":(object) button value, "type":(str, optional) button type, "disabled":(bool, optional) whether the button is disabled, "color":(str, optional) button color }
  When type='reset'/'cancel' or disabled=True, value can be omitted
- tuple or list: (label, value, [type], [disabled])
- single value: label and value of button use the same value
The value of button can be any JSON serializable object.

type can be:
- 'submit' : After clicking the button, the entire form is submitted immediately, and the value of this input item in the final form is the value of the button that was clicked. 'submit' is the default value of type
- 'cancel' : Cancel form. After clicking the button, the entire form will be submitted immediately, and the form value will return None
- 'reset' : Reset form. After clicking the button, the entire form will be reset, and the input items will become the initial state. Note: After clicking the type=reset button, the form will not be submitted, and the actions() call will not return
The color of button can be one of: primary, secondary, success, danger, warning, info, light, dark.
label, name, help_text (-) -- Those arguments have the same meaning as for input()

Returns

If the user clicks the type=submit button to submit the form, return the value of the button clicked by the user. If the user clicks the type=cancel button or submits the form by other means, None is returned.

When actions() is used as the last input item in input_group() and contains a button with type='submit', the default submit button of the input_group() form will be replace with the current actions()

**usage scenes of actions() **

Perform simple selection operations:

confirm = actions('Confirm to delete file?', ['confirm', 'cancel'],
                      help_text='Unrecoverable after file deletion')
if confirm=='confirm':  
    ...  

Compared with other input items, when using actions(), the user only needs to click once to complete the submission.

Replace the default submit button:

info = input_group('Add user', [
    input('username', type=TEXT, name='username', required=True),
    input('password', type=PASSWORD, name='password', required=True),
    actions('actions', [
        {'label': 'Save', 'value': 'save'},
        {'label': 'Save and add next', 'value': 'save_and_continue'},
        {'label': 'Reset', 'type': 'reset', 'color': 'warning'},
        {'label': 'Cancel', 'type': 'cancel', 'color': 'danger'},
    ], name='action', help_text='actions'),
])
put_code('info = ' + json.dumps(info, indent=4))
if info is not None:
    save_user(info['username'], info['password'])  
    if info['action'] == 'save_and_continue':
        add_next()  

pywebio.input.file_upload(label='', accept=None, name=None, placeholder='Choose file', multiple=False, max_size=0, max_total_size=0, required=None, help_text=None, **other_html_attrs)[source]¶

File uploading

پارامترها

accept (str or list) --
Single value or list, indicating acceptable file types. The available formats of file types are:
- A valid case-insensitive filename extension, starting with a period (".") character. For example: .jpg, .pdf, or .doc.
- A valid MIME type string, with no extensions. For examples: application/pdf, audio/*, video/*, image/*. For more information, please visit: https://developer.mozilla.org/en-US/docs/Web/HTTP/Basics_of_HTTP/MIME_types
placeholder (str) -- A hint to the user of what to be uploaded. It will appear in the input field when there is no file selected.
multiple (bool) -- Whether to allow upload multiple files. Default is False.
max_size (int/str) --

The maximum size of a single file, exceeding the limit will prohibit uploading.
The default is 0, which means there is no limit to the size.

max_size can be a integer indicating the number of bytes, or a case-insensitive string ending with K / M / G (representing kilobytes, megabytes, and gigabytes, respectively). E.g: max_size=500, max_size='40K', max_size='3M'
max_total_size (int/str) -- The maximum size of all files. Only available when multiple=True. The default is 0, which means there is no limit to the size. The format is the same as the max_size parameter
required (bool) -- Indicates whether the user must specify a file for the input. Default is False.
label, name, help_text, other_html_attrs (-) -- Those arguments have the same meaning as for input()

Returns

When multiple=False, a dict is returned:

{
    'filename': file name，
    'content'：content of the file (in bytes),
    'mime_type': MIME type of the file,
    'last_modified': Last modified time (timestamp) of the file
}

If there is no file uploaded, return None.

When multiple=True, a list is returned. The format of the list item is the same as the return value when multiple=False above. If the user does not upload a file, an empty list is returned.

توجه

If uploading large files, please pay attention to the file upload size limit setting of the web framework. When using start_server() or path_deploy() to start the PyWebIO application, the maximum file size to be uploaded allowed by the web framework can be set through the max_payload_size parameter.

# Upload a file and save to server                      
f = input.file_upload("Upload a file")                  
open('asset/'+f['filename'], 'wb').write(f['content'])  

imgs = file_upload("Select some pictures:", accept="image/*", multiple=True)
for img in imgs:
    put_image(img['content'])

pywebio.input.slider(label='', *, name=None, value=0, min_value=0, max_value=100, step=1, validate=None, onchange=None, required=None, help_text=None, **other_html_attrs)[source]¶

Range input.

پارامترها

value (int/float) -- The initial value of the slider.
min_value (int/float) -- The minimum permitted value.
max_value (int/float) -- The maximum permitted value.
step (int) -- The stepping interval. Only available when value, min_value and max_value are all integer.
label, name, validate, onchange, required, help_text, other_html_attrs (-) -- Those arguments have the same meaning as for input()

Return int/float

If one of value, min_value and max_value is float, the return value is a float, otherwise an int is returned.

pywebio.input.input_group(label='', inputs=None, validate=None, cancelable=False)[source]¶

Input group. Request a set of inputs from the user at once.

پارامترها

label (str) -- Label of input group.
inputs (list) -- Input items. The item of the list is the call to the single input function, and the name parameter need to be passed in the single input function.
validate (callable) --
validation function for the group. If provided, the validation function will be called when the user submits the form.

Function signature: callback(data) -> (name, error_msg). validate receives the value of the entire group as a parameter. When the form value is valid, it returns None. When an input item's value is invalid, it returns the name value of the item and an error message. For example:

def check_form(data):
    if len(data['name']) > 6:
        return ('name', 'Name to long!')
    if data['age'] <= 0:
        return ('age', 'Age cannot be negative!')

data = input_group("Basic info",[
    input('Input your name', name='name'),
    input('Repeat your age', name='age', type=NUMBER)
], validate=check_form)

put_text(data['name'], data['age'])

پارامترها

cancelable (bool) --

Whether the form can be cancelled. Default is False. If cancelable=True, a "Cancel" button will be displayed at the bottom of the form.

Note: If the last input item in the group is actions(), cancelable will be ignored.

Returns

If the user cancels the form, return None, otherwise a dict is returned, whose key is the name of the input item, and whose value is the value of the input item.

pywebio.input.input_update(name=None, **spec)[source]¶

Update attributes of input field. This function can only be called in onchange callback of input functions.

پارامترها

name (str) -- The name of the target input item. Optional, default is the name of input field which triggers onchange
spec -- The input parameters need to be updated. Note that those parameters can not be updated: type, name, validate, action, code, onchange, multiple

An example of implementing dependent input items in an input group:

country2city = {
    'China': ['Beijing', 'Shanghai', 'Hong Kong'],
    'USA': ['New York', 'Los Angeles', 'San Francisco'],
}
countries = list(country2city.keys())
location = input_group("Select a location", [
    select('Country', options=countries, name='country',
           onchange=lambda c: input_update('city', options=country2city[c])),
    select('City', options=country2city[countries[0]], name='city'),
])

`pywebio.output` --- ایجاد خروجی به مرورگر وب¶

This module provides functions to output all kinds of content to the user's browser, and supply flexible output control.

لیست توابع¶

The following table shows the output-related functions provided by PyWebIO.
The functions marked with * indicate that they accept put_xxx calls as arguments.
The functions marked with † indicate that they can use as context manager.

	Name	Description
محدوده خروجی	`put_scope`	Create a new scope
	`use_scope`^†	Enter a scope
	`get_scope`	Get the current scope name in the runtime scope stack
	`clear`	Clear the content of scope
	`remove`	Remove the scope
	`scroll_to`	Scroll the page to the scope
خروجی دادن محتوا	`put_text`	Output plain text
	`put_markdown`	Output Markdown
	`put_info`^† `put_success`^† `put_warning`^† `put_error`^†	Output Messages.
	`put_html`	Output html
	`put_link`	Output link
	`put_processbar`	Output a process bar
	`put_loading`^†	Output loading prompt
	`put_code`	Output code block
	`put_table`^*	Output table
	`put_button` `put_buttons`	Output button and bind click event
	`put_image`	Output image
	`put_file`	Output a link to download a file
	`put_tabs`^*	Output tabs
	`put_collapse`^*†	Output collapsible content
	`put_scrollable`^*†	Output a fixed height content area, scroll bar is displayed when the content exceeds the limit
	`put_widget`^*	Output your own widget
تعاملات دیگر	`toast`	Show a notification message
	`popup`^*†	Show popup
	`close_popup`	Close the current popup window.
چیدمان و استایل	`put_row`^*†	Use row layout to output content
	`put_column`^*†	Use column layout to output content
	`put_grid`^*	Output content using grid layout
	`span`	Cross-cell content
	`style`^*	Customize the css style of output content

محدوده خروجی¶

همچنین ملاحظه نمائید

Use Guide: Output Scope

pywebio.output.put_scope(name, content=[], scope=None, position=- 1) → pywebio.io_ctrl.Output[source]¶

Output a scope

پارامترها

name (str) --
content (list/put_xxx()) -- The initial content of the scope, can be put_xxx() or a list of it.
scope, position (int) -- Those arguments have the same meaning as for put_text()

pywebio.output.use_scope(name=None, clear=False)[source]¶

Open or enter a scope. Can be used as context manager and decorator.

See User manual - use_scope()

پارامترها

name (str) -- Scope name. If it is None, a globally unique scope name is generated. (When used as context manager, the context manager will return the scope name)
clear (bool) -- Whether to clear the contents of the scope before entering the scope.

Usage

with use_scope(...) as scope_name:
    put_xxx()

@use_scope(...)
def app():
    put_xxx()

pywebio.output.get_scope(stack_idx=- 1)[source]¶

Get the scope name of runtime scope stack

پارامترها

stack_idx (int) --

The index of the runtime scope stack. Default is -1.

0 means the top level scope(the ROOT Scope), -1 means the current Scope, -2 means the scope used before entering the current scope, ...

Returns

Returns the scope name with the index, and returns None when occurs index error

pywebio.output.clear(scope=None)[source]¶

Clear the content of the specified scope

پارامترها: scope (str) -- Target scope name. Default is the current scope.

pywebio.output.remove(scope=None)[source]¶

Remove the specified scope

پارامترها: scope (str) -- Target scope name. Default is the current scope.

pywebio.output.scroll_to(scope=None, position='top')[source]¶

Scroll the page to the specified scope

پارامترها

scope (str) -- Target scope. Default is the current scope.
position (str) --
Where to place the scope in the visible area of the page. Available value:
- 'top' : Keep the scope at the top of the visible area of the page
- 'middle' : Keep the scope at the middle of the visible area of the page
- 'bottom' : Keep the scope at the bottom of the visible area of the page

خروجی دادن محتوا¶

Scope related parameters of output function

The output function will output the content to the "current scope" by default, and the "current scope" for the runtime context can be set by use_scope().

In addition, all output functions support a scope parameter to specify the destination scope to output:

with use_scope('scope3'):
    put_text('text1 in scope3')   # output to current scope: scope3
    put_text('text in ROOT scope', scope='ROOT')   # output to ROOT Scope

put_text('text2 in scope3', scope='scope3')   # output to scope3

The results of the above code are as follows:

text1 in scope3
text2 in scope3
text in ROOT scope

A scope can contain multiple output items, the default behavior of output function is to append its content to target scope. The position parameter of output function can be used to specify the insert position in target scope.

Each output item in a scope has an index, the first item's index is 0, and the next item's index is incremented by one. You can also use a negative number to index the items in the scope, -1 means the last item, -2 means the item before the last, ...

The position parameter of output functions accepts an integer. When position>=0, it means to insert content before the item whose index equal position; when position<0, it means to insert content after the item whose index equal position:

with use_scope('scope1'):
    put_text('A')
    put_text('B', position=0)   # insert B before A -> B A
    put_text('C', position=-2)  # insert C after B -> B C A
    put_text('D', position=1)   # insert D before C B -> B D C A

Output functions

pywebio.output.put_text(*texts, sep=' ', inline=False, scope=None, position=- 1) → pywebio.io_ctrl.Output[source]¶

Output plain text

پارامترها

texts -- Texts need to output. The type can be any object, and the str() function will be used for non-string objects.
sep (str) -- The separator between the texts
inline (bool) -- Use text as an inline element (no line break at the end of the text). Default is False
scope (str) --
The target scope to output. If the scope does not exist, no operation will be performed.

Can specify the scope name or use a integer to index the runtime scope stack.
position (int) -- The position where the content is output in target scope

For more information about scope and position parameter, please refer to User Manual

pywebio.output.put_markdown(mdcontent, lstrip=True, options=None, sanitize=True, scope=None, position=- 1, **kwargs) → pywebio.io_ctrl.Output[source]¶

Output Markdown

پارامترها

mdcontent (str) -- Markdown string
lstrip (bool) -- Whether to remove the leading whitespace in each line of mdcontent. The number of the whitespace to remove will be decided cleverly.
options (dict) -- Configuration when parsing Markdown. PyWebIO uses marked library to parse Markdown, the parse options see: https://marked.js.org/using_advanced#options (Only supports members of string and boolean type)
sanitize (bool) -- Whether to use DOMPurify to filter the content to prevent XSS attacks.
scope, position (int) -- Those arguments have the same meaning as for put_text()

When using Python triple quotes syntax to output multi-line Markdown in a function, you can indent the Markdown text to keep a good code format. PyWebIO will cleverly remove the indent for you when show the Markdown:

# good code format
def hello():
    put_markdown(r""" # H1
    This is content.
    """)

تغییر داده شده در نسخه 1.5: Enable lstrip by default. Deprecate strip_indent.

pywebio.output.put_info(*contents, closable=False, scope=None, position=- 1) → Output:[source]¶

pywebio.output.put_success(*contents, closable=False, scope=None, position=- 1) → Output:[source]¶

pywebio.output.put_warning(*contents, closable=False, scope=None, position=- 1) → Output:[source]¶

pywebio.output.put_error(*contents, closable=False, scope=None, position=- 1) → Output:[source]¶

Output Messages.

پارامترها

contents -- Message contents. The item is put_xxx() call, and any other type will be converted to put_text(content).
closable (bool) -- Whether to show a dismiss button on the right of the message.
scope, position (int) -- Those arguments have the same meaning as for put_text()

جدید در نسخه 1.2.

pywebio.output.put_html(html, sanitize=False, scope=None, position=- 1) → pywebio.io_ctrl.Output[source]¶

Output HTML content

پارامترها

html -- html string
sanitize (bool) --
Whether to use DOMPurify to filter the content to prevent XSS attacks.
scope, position (int) -- Those arguments have the same meaning as for put_text()

pywebio.output.put_link(name, url=None, app=None, new_window=False, scope=None, position=- 1) → pywebio.io_ctrl.Output[source]¶

Output hyperlinks to other web page or PyWebIO Application page.

پارامترها

name (str) -- The label of the link
url (str) -- Target url
app (str) -- Target PyWebIO Application name. See also: Server mode
new_window (bool) -- Whether to open the link in a new window
scope, position (int) -- Those arguments have the same meaning as for put_text()

The url and app parameters must specify one but not both

pywebio.output.put_processbar(name, init=0, label=None, auto_close=False, scope=None, position=- 1) → pywebio.io_ctrl.Output[source]¶

Output a process bar

پارامترها

name (str) -- The name of the progress bar, which is the unique identifier of the progress bar
init (float) -- The initial progress value of the progress bar. The value is between 0 and 1
label (str) -- The label of process bar. The default is the percentage value of the current progress.
auto_close (bool) -- Whether to remove the progress bar after the progress is completed
scope, position (int) -- Those arguments have the same meaning as for put_text()

Example:

import time

put_processbar('bar');
for i in range(1, 11):
    set_processbar('bar', i / 10)
    time.sleep(0.1)

همچنین ملاحظه نمائید

use set_processbar() to set the progress of progress bar

pywebio.output.set_processbar(name, value, label=None)[source]¶

Set the progress of progress bar

پارامترها

name (str) -- The name of the progress bar
value (float) -- The progress value of the progress bar. The value is between 0 and 1
label (str) -- The label of process bar. The default is the percentage value of the current progress.

تعاملات دیگر¶

pywebio.output.toast(content, duration=2, position='center', color='info', onclick=None)[source]¶

Show a notification message.

پارامترها

content (str) -- Notification content.
duration (float) -- The duration of the notification display, in seconds. 0 means not to close automatically (at this time, a close button will be displayed next to the message, and the user can close the message manually)
position (str) -- Where to display the notification message. Available values are 'left', 'center' and 'right'.
color (str) -- Background color of the notification. Available values are 'info', 'error', 'warn', 'success' or hexadecimal color value starting with '#'
onclick (callable) --
The callback function when the notification message is clicked. The callback function receives no parameters.

Note: When in Coroutine-based session, the callback can be a coroutine function.

Example:

def show_msg():
    put_text("You clicked the notification.")

toast('New messages', position='right', color='#2188ff', duration=0, onclick=show_msg)

pywebio.output.popup(title, content=None, size='normal', implicit_close=True, closable=True)[source]¶

Show a popup.

⚠️: In PyWebIO, you can't show multiple popup windows at the same time. Before displaying a new pop-up window, the existing popup on the page will be automatically closed. You can use close_popup() to close the popup manually.

پارامترها

title (str) -- The title of the popup.
content (list/str/put_xxx()) -- The content of the popup. Can be a string, the put_xxx() calls, or a list of them.
size (str) -- The size of popup window. Available values are: 'large', 'normal' and 'small'.
implicit_close (bool) -- If enabled, the popup can be closed implicitly by clicking the content outside the popup window or pressing the Esc key. Default is False.
closable (bool) -- Whether the user can close the popup window. By default, the user can close the popup by clicking the close button in the upper right of the popup window. When set to False, the popup window can only be closed by popup_close(), at this time the implicit_close parameter will be ignored.

popup() can be used in 3 ways: direct call, context manager, and decorator.

direct call:

context manager:

The context manager will open a new output scope and return the scope name. The output in the context manager will be displayed on the popup window by default. After the context manager exits, the popup window will not be closed. You can still use the scope parameter of the output function to output to the popup.

decorator:

pywebio.output.close_popup()[source]¶

Close the current popup window.

چیدمان و استایل¶

pywebio.output.put_row(content=[], size=None, scope=None, position=- 1) → pywebio.io_ctrl.Output[source]¶

Use row layout to output content. The content is arranged horizontally

پارامترها

content (list) -- Content list, the item is put_xxx() call or None. None represents the space between the output
size (str) --

Used to indicate the width of the items, is a list of width values separated by space.

Each width value corresponds to the items one-to-one. (None item should also correspond to a width value).

By default, size assigns a width of 10 pixels to the None item, and distributes the width equally to the remaining items.

Available format of width value are:
- pixels: like 100px
- percentage: Indicates the percentage of available width. like 33.33%
- fr keyword: Represents a scale relationship, 2fr represents twice the width of 1fr
- auto keyword: Indicates that the length is determined by the browser
- minmax(min, max) : Generate a length range, indicating that the length is within this range. It accepts two parameters, minimum and maximum. For example: minmax(100px, 1fr) means the length is not less than 100px and not more than 1fr
scope, position (int) -- Those arguments have the same meaning as for put_text()

Example

# Two code blocks of equal width, separated by 10 pixels
put_row([put_code('A'), None, put_code('B')])

# The width ratio of the left and right code blocks is 2:3, which is equivalent to size='2fr 10px 3fr'
put_row([put_code('A'), None, put_code('B')], size='40% 10px 60%')

pywebio.output.put_column(content=[], size=None, scope=None, position=- 1) → pywebio.io_ctrl.Output[source]¶

Use column layout to output content. The content is arranged vertically

پارامترها

content (list) -- Content list, the item is put_xxx() call or None. None represents the space between the output
size (str) -- Used to indicate the width of the items, is a list of width values separated by space. The format is the same as the size parameter of the put_row() function.
scope, position (int) -- Those arguments have the same meaning as for put_text()

pywebio.output.put_grid(content, cell_width='auto', cell_height='auto', cell_widths=None, cell_heights=None, direction='row', scope=None, position=- 1) → pywebio.io_ctrl.Output[source]¶

Output content using grid layout

پارامترها

content -- Content of grid, which is a two-dimensional list. The item of list is put_xxx() call or None. None represents the space between the output. The item can use the span() to set the cell span.
cell_width (str) -- The width of grid cell.
cell_height (str) -- The height of grid cell.
cell_widths (str) -- The width of each column of the grid. The width values are separated by a space. Can not use cell_widths and cell_width at the same time
cell_heights (str) -- The height of each row of the grid. The height values are separated by a space. Can not use cell_heights and cell_height at the same time
direction (str) --
Controls how auto-placed items get inserted in the grid. Can be 'row'``(default) or ``'column' .

'row' : Places items by filling each row

'column' : Places items by filling each column
scope, position (int) -- Those arguments have the same meaning as for put_text()

The format of width/height value in cell_width,``cell_height``,``cell_widths``,``cell_heights`` can refer to the size parameter of the put_row() function.

Example

put_grid([
    [put_text('A'), put_text('B'), put_text('C')],
    [None, span(put_text('D'), col=2, row=1)],
    [put_text('E'), put_text('F'), put_text('G')],
], cell_width='100px', cell_height='100px')

pywebio.output.style(outputs, css_style) → Union[pywebio.io_ctrl.Output, pywebio.io_ctrl.OutputList][source]¶

Customize the css style of output content

منسوخ شده از نسخه 1.3: See User Guide for new way to set css style for output.

پارامترها

outputs (list/put_xxx()) -- The output content can be a put_xxx() call or a list of it.
css_style (str) -- css style string

Returns

The output contents with css style added:

Note: If outputs is a list of put_xxx() calls, the style will be set for each item of the list. And the return value can be used in anywhere accept a list of put_xxx() calls.

Example

style(put_text('Red'), 'color:red')

style([
    put_text('Red'),
    put_markdown('~~del~~')
], 'color:red')

put_table([
    ['A', 'B'],
    ['C', style(put_text('Red'), 'color:red')],
])

put_collapse('title', style([
    put_text('text'),
    put_markdown('~~del~~'),
], 'margin-left:20px'))

`pywebio.session` --- کنترل بیشتر به نشست¶

pywebio.session.download(name, content)[source]¶

Send file to user, and the user browser will download the file to the local

پارامترها

name (str) -- File name when downloading
content -- File content. It is a bytes-like object

Example:

put_button('Click to download', lambda: download('hello-world.txt', b'hello world!'))

pywebio.session.run_js(code_, **args)[source]¶

Execute JavaScript code in user browser.

The code is run in the browser's JS global scope.

پارامترها

code (str) -- JavaScript code
args -- Local variables passed to js code. Variables need to be JSON-serializable.

Example:

run_js('console.log(a + b)', a=1, b=2)

pywebio.session.eval_js(expression_, **args)[source]¶

Execute JavaScript expression in the user's browser and get the value of the expression

پارامترها

expression (str) -- JavaScript expression. The value of the expression need to be JSON-serializable. If the value of the expression is a promise, eval_js() will wait for the promise to resolve and return the value of it. When the promise is rejected, None is returned.
args -- Local variables passed to js code. Variables need to be JSON-serializable.

Returns

The value of the expression.

Note: When using coroutine-based session, you need to use the await eval_js(expression) syntax to call the function.

Example:

current_url = eval_js("window.location.href")

function_res = eval_js('''(function(){
    var a = 1;
    a += b;
    return a;
})()''', b=100)

promise_res = eval_js('''new Promise(resolve => {
    setTimeout(() => {
        resolve('Returned inside callback.');
    }, 2000);
});''')

تغییر داده شده در نسخه 1.3: The JS expression support return promise.

pywebio.session.register_thread(thread: threading.Thread)[source]¶

Register the thread so that PyWebIO interactive functions are available in the thread.

Can only be used in the thread-based session.

See Concurrent in Server mode

پارامترها: thread (threading.Thread) -- Thread object

pywebio.session.defer_call(func)[source]¶

Set the function to be called when the session closes.

Whether it is because the user closes the page or the task finishes to cause session closed, the function set by defer_call(func) will be executed. Can be used for resource cleaning.

You can call defer_call(func) multiple times in the session, and the set functions will be executed sequentially after the session closes.

defer_call() can also be used as decorator:

@defer_call
def cleanup():
   pass

دقت

PyWebIO interactive functions cannot be called inside the deferred functions.

pywebio.session.local¶

The session-local object for current session.

local is a dictionary object that can be accessed through attributes, it aim to be used to save some session-local state of your application. Attributes of local are not shared between sessions, each session sees only the attributes it itself placed in there.

Usage Scenes

When you need to share some session-independent data with multiple functions, it is more convenient to use session-local objects to save state than to use function parameters.

Here is a example of a session independent counter implementation:

from pywebio.session import local
def add():
    local.cnt = (local.cnt or 0) + 1

def show():
    put_text(local.cnt or 0)

def main():
    put_buttons(['Add counter', 'Show counter'], [add, show])

The way to pass state through function parameters is:

from functools import partial
def add(cnt):
    cnt[0] += 1

def show(cnt):
    put_text(cnt[0])

def main():
    cnt = [0]  # Trick: to pass by reference
    put_buttons(['Add counter', 'Show counter'], [partial(add, cnt), partial(show, cnt)])

Of course, you can also use function closures to achieved the same:

def main():
    cnt = 0

    def add():
        nonlocal cnt
        cnt += 1

    def show():
        put_text(cnt)

    put_buttons(['Add counter', 'Show counter'], [add, show])

Operations supported by local object

local is a dictionary object that can be accessed through attributes. When accessing a property that does not exist in the data object, it returns None instead of throwing an exception. The method of dictionary is not supported in local. It supports the in operator to determine whether the key exists. You can use local._dict to get the underlying dictionary data.

local.name = "Wang"
local.age = 22
assert local.foo is None
local[10] = "10"

for key in local:
    print(key)

assert 'bar' not in local
assert 'name' in local

print(local._dict)

جدید در نسخه 1.1.

pywebio.session.set_env(**env_info)[source]¶

configure the environment of current session.

Available configuration are:

title (str): Title of current page.
output_animation (bool): Whether to enable output animation, enabled by default
auto_scroll_bottom (bool): Whether to automatically scroll the page to the bottom after output content, it is closed by default. Note that after enabled, only outputting to ROOT scope can trigger automatic scrolling.
http_pull_interval (int): The period of HTTP polling messages (in milliseconds, default 1000ms), only available in sessions based on HTTP connection.
input_panel_fixed (bool): Whether to make input panel fixed at bottom, enabled by default
input_panel_min_height (int): The minimum height of input panel (in pixel, default 300px), it should be larger than 75px. Available only when input_panel_fixed=True
input_panel_init_height (int): The initial height of input panel (in pixel, default 300px), it should be larger than 175px. Available only when input_panel_fixed=True
input_auto_focus (bool): Whether to focus on input automatically after showing input panel, default is True
output_max_width (str): The max width of the page content area (in pixel or percentage, e.g. '1080px', '80%'. Default is 880px).

Example:

set_env(title='Awesome PyWebIO!!', output_animation=False)

تغییر داده شده در نسخه 1.4: Added the output_max_width parameter

pywebio.session.go_app(name, new_window=True)[source]¶

Jump to another task of a same PyWebIO application. Only available in PyWebIO Server mode

پارامترها

name (str) -- Target PyWebIO task name.
new_window (bool) -- Whether to open in a new window, the default is True

`pywebio.platform` --- دیپلوی کردن اپلیکیشن ها¶

The platform module provides support for deploying PyWebIO applications in different ways.

دیپلوی دایرکتوری
دیپلوی اپلیکیشن
دیگر

همچنین ملاحظه نمائید

دیپلوی دایرکتوری ¶

You can use path_deploy() or path_deploy_http() to deploy the PyWebIO applications from a directory. The python file under this directory need contain the main function to be seen as the PyWebIO application. You can access the application by using the file path as the URL.

Note that users can't view and access files or folders whose name begin with the underscore in this directory.

For example, given the following folder structure:

.
├── A
│   └── a.py
├── B
│   └── b.py
└── c.py

All three python files contain main PyWebIO application function.

If you use this directory in path_deploy(), you can access the PyWebIO application in b.py by using URL http://<host>:<port>/A/b. And if the files have been modified after run path_deploy(), you can use reload URL parameter to reload application in the file: http://<host>:<port>/A/b?reload

You can also use the command pywebio-path-deploy to start a server just like using path_deploy(). For more information, refer pywebio-path-deploy --help

pywebio.platform.path_deploy(base, port=0, host='', index=True, static_dir=None, reconnect_timeout=0, cdn=True, debug=False, allowed_origins=None, check_origin=None, max_payload_size='200M', **tornado_app_settings)[source]¶

Deploy the PyWebIO applications from a directory.

The server communicates with the browser using WebSocket protocol.

پارامترها

base (str) -- Base directory to load PyWebIO application.
port (int) -- The port the server listens on.
host (str) -- The host the server listens on.
index (bool/callable) --
Whether to provide a default index page when request a directory, default is True. index also accepts a function to custom index page, which receives the requested directory path as parameter and return HTML content in string.

You can override the index page by add a index.py PyWebIO app file to the directory.
static_dir (str) -- Directory to store the application static files. The files in this directory can be accessed via http://<host>:<port>/static/files. For example, if there is a A/B.jpg file in static_dir path, it can be accessed via http://<host>:<port>/static/A/B.jpg.
reconnect_timeout (int) -- The client can reconnect to server within reconnect_timeout seconds after an unexpected disconnection. If set to 0 (default), once the client disconnects, the server session will be closed.

The rest arguments of path_deploy() have the same meaning as for pywebio.platform.tornado.start_server()

pywebio.platform.path_deploy_http(base, port=0, host='', index=True, static_dir=None, cdn=True, debug=False, allowed_origins=None, check_origin=None, session_expire_seconds=None, session_cleanup_interval=None, max_payload_size='200M', **tornado_app_settings)[source]¶

Deploy the PyWebIO applications from a directory.

The server communicates with the browser using HTTP protocol.

The base, port, host, index, static_dir arguments of path_deploy_http() have the same meaning as for pywebio.platform.path_deploy()

The rest arguments of path_deploy_http() have the same meaning as for pywebio.platform.tornado_http.start_server()

دیپلوی اپلیکیشن ¶

The start_server() functions can start a Python Web server and serve given PyWebIO applications on it.

The webio_handler() and webio_view() functions can be used to integrate PyWebIO applications into existing Python Web project.

The wsgi_app() and asgi_app() is used to get the WSGI or ASGI app for running PyWebIO applications. This is helpful when you don't want to start server with the Web framework built-in's. For example, you want to use other WSGI server, or you are deploying app in a cloud environment. Note that only Flask, Django and FastApi backend support it.

تغییر داده شده در نسخه 1.1: Added the cdn parameter in start_server(), webio_handler() and webio_view().

تغییر داده شده در نسخه 1.2: Added the static_dir parameter in start_server().

تغییر داده شده در نسخه 1.3: Added the wsgi_app() and asgi_app().

پشتیبانی Tornado ¶

There are two protocols (WebSocket and HTTP) can be used to communicates with the browser:

WebSocket ¶

pywebio.platform.tornado.start_server(applications, port=0, host='', debug=False, cdn=True, static_dir=None, remote_access=False, reconnect_timeout=0, allowed_origins=None, check_origin=None, auto_open_webbrowser=False, max_payload_size='200M', **tornado_app_settings)[source]¶

Start a Tornado server to provide the PyWebIO application as a web service.

The Tornado server communicates with the browser by WebSocket protocol.

Tornado is the default backend server for PyWebIO applications, and start_server can be imported directly using from pywebio import start_server.

پارامترها

applications (list/dict/callable) --
PyWebIO application. Can be a task function, a list of functions, or a dictionary. Refer to Advanced topic: Multiple applications in start_server() for more information.

When the task function is a coroutine function, use Coroutine-based session implementation, otherwise, use thread-based session implementation.
port (int) -- The port the server listens on. When set to 0, the server will automatically select a available port.
host (str) -- The host the server listens on. host may be either an IP address or hostname. If it’s a hostname, the server will listen on all IP addresses associated with the name. host may be an empty string or None to listen on all available interfaces.
debug (bool) -- Tornado Server's debug mode. If enabled, the server will automatically reload for code changes. See tornado doc for more detail.
cdn (bool/str) -- Whether to load front-end static resources from CDN, the default is True. Can also use a string to directly set the url of PyWebIO static resources.
static_dir (str) -- The directory to store the application static files. The files in this directory can be accessed via http://<host>:<port>/static/files. For example, if there is a A/B.jpg file in static_dir path, it can be accessed via http://<host>:<port>/static/A/B.jpg.
remote_access (bool) -- Whether to enable remote access, when enabled, you can get a temporary public network access address for the current application, others can access your application via this address.
auto_open_webbrowser (bool) -- Whether or not auto open web browser when server is started (if the operating system allows it) .
reconnect_timeout (int) -- The client can reconnect to server within reconnect_timeout seconds after an unexpected disconnection. If set to 0 (default), once the client disconnects, the server session will be closed.
allowed_origins (list) --
The allowed request source list. (The current server host is always allowed) The source contains the protocol, domain name, and port part. Can use Unix shell-style wildcards:
- * matches everything
- ? matches any single character
- [seq] matches any character in seq
- [!seq] matches any character not in seq
Such as: https://*.example.com 、 *://*.example.com

For detail, see Python Doc
check_origin (callable) -- The validation function for request source. It receives the source string (which contains protocol, host, and port parts) as parameter and return True/False to indicate that the server accepts/rejects the request. If check_origin is set, the allowed_origins parameter will be ignored.
auto_open_webbrowser -- Whether or not auto open web browser when server is started (if the operating system allows it) .
max_payload_size (int/str) -- Max size of a websocket message which Tornado can accept. Messages larger than the max_payload_size (default 200MB) will not be accepted. max_payload_size can be a integer indicating the number of bytes, or a string ending with K / M / G (representing kilobytes, megabytes, and gigabytes, respectively). E.g: 500, '40K', '3M'
tornado_app_settings -- Additional keyword arguments passed to the constructor of tornado.web.Application. For details, please refer: https://www.tornadoweb.org/en/stable/web.html#tornado.web.Application.settings

pywebio.platform.tornado.webio_handler(applications, cdn=True, reconnect_timeout=0, allowed_origins=None, check_origin=None)[source]¶

Get the RequestHandler class for running PyWebIO applications in Tornado. The RequestHandler communicates with the browser by WebSocket protocol.

The arguments of webio_handler() have the same meaning as for pywebio.platform.tornado.start_server()

HTTP ¶

pywebio.platform.tornado_http.start_server(applications, port=8080, host='', debug=False, cdn=True, static_dir=None, allowed_origins=None, check_origin=None, auto_open_webbrowser=False, session_expire_seconds=None, session_cleanup_interval=None, max_payload_size='200M', **tornado_app_settings)[source]¶

Start a Tornado server to provide the PyWebIO application as a web service.

The Tornado server communicates with the browser by HTTP protocol.

پارامترها

session_expire_seconds (int) -- Session expiration time, in seconds(default 60s). If no client message is received within session_expire_seconds, the session will be considered expired.
session_cleanup_interval (int) -- Session cleanup interval, in seconds(default 120s). The server will periodically clean up expired sessions and release the resources occupied by the sessions.
max_payload_size (int/str) -- Max size of a request body which Tornado can accept.

The rest arguments of start_server() have the same meaning as for pywebio.platform.tornado.start_server()

جدید در نسخه 1.2.

pywebio.platform.tornado_http.webio_handler(applications, cdn=True, session_expire_seconds=None, session_cleanup_interval=None, allowed_origins=None, check_origin=None)[source]¶

Get the RequestHandler class for running PyWebIO applications in Tornado. The RequestHandler communicates with the browser by HTTP protocol.

The arguments of webio_handler() have the same meaning as for pywebio.platform.tornado_http.start_server()

جدید در نسخه 1.2.

پشتیبانی Flask ¶

When using the Flask as PyWebIO backend server, you need to install Flask by yourself and make sure the version is not less than 0.10. You can install it with the following command:

pip3 install -U flask>=0.10

pywebio.platform.flask.webio_view(applications, cdn=True, session_expire_seconds=None, session_cleanup_interval=None, allowed_origins=None, check_origin=None)[source]¶

Get the view function for running PyWebIO applications in Flask. The view communicates with the browser by HTTP protocol.

The arguments of webio_view() have the same meaning as for pywebio.platform.flask.start_server()

pywebio.platform.flask.wsgi_app(applications, cdn=True, static_dir=None, allowed_origins=None, check_origin=None, session_expire_seconds=None, session_cleanup_interval=None, max_payload_size='200M')[source]¶

Get the Flask WSGI app for running PyWebIO applications.

The arguments of wsgi_app() have the same meaning as for pywebio.platform.flask.start_server()

pywebio.platform.flask.start_server(applications, port=8080, host='', cdn=True, static_dir=None, remote_access=False, allowed_origins=None, check_origin=None, session_expire_seconds=None, session_cleanup_interval=None, debug=False, max_payload_size='200M', **flask_options)[source]¶

Start a Flask server to provide the PyWebIO application as a web service.

پارامترها

session_expire_seconds (int) -- Session expiration time, in seconds(default 600s). If no client message is received within session_expire_seconds, the session will be considered expired.
session_cleanup_interval (int) -- Session cleanup interval, in seconds(default 300s). The server will periodically clean up expired sessions and release the resources occupied by the sessions.
debug (bool) -- Flask debug mode. If enabled, the server will automatically reload for code changes.
max_payload_size (int/str) -- Max size of a request body which Flask can accept.
flask_options -- Additional keyword arguments passed to the flask.Flask.run. For details, please refer: https://flask.palletsprojects.com/en/1.1.x/api/#flask.Flask.run

The arguments of start_server() have the same meaning as for pywebio.platform.tornado.start_server()

پشتیبانی Django ¶

When using the Django as PyWebIO backend server, you need to install Django by yourself and make sure the version is not less than 2.2. You can install it with the following command:

pip3 install -U django>=2.2

pywebio.platform.django.webio_view(applications, cdn=True, session_expire_seconds=None, session_cleanup_interval=None, allowed_origins=None, check_origin=None)[source]¶

Get the view function for running PyWebIO applications in Django. The view communicates with the browser by HTTP protocol.

The arguments of webio_view() have the same meaning as for pywebio.platform.flask.webio_view()

pywebio.platform.django.wsgi_app(applications, cdn=True, static_dir=None, allowed_origins=None, check_origin=None, session_expire_seconds=None, session_cleanup_interval=None, debug=False, max_payload_size='200M', **django_options)[source]¶

Get the Django WSGI app for running PyWebIO applications.

The arguments of wsgi_app() have the same meaning as for pywebio.platform.django.start_server()

pywebio.platform.django.start_server(applications, port=8080, host='', cdn=True, static_dir=None, remote_access=False, allowed_origins=None, check_origin=None, session_expire_seconds=None, session_cleanup_interval=None, debug=False, max_payload_size='200M', **django_options)[source]¶

Start a Django server to provide the PyWebIO application as a web service.

پارامترها

debug (bool) -- Django debug mode. See Django doc for more detail.
django_options -- Additional settings to django server. For details, please refer: https://docs.djangoproject.com/en/3.0/ref/settings/ . Among them, DEBUG, ALLOWED_HOSTS, ROOT_URLCONF, SECRET_KEY are set by PyWebIO and cannot be specified in django_options.

The rest arguments of start_server() have the same meaning as for pywebio.platform.flask.start_server()

پشتیبانی aiohttp ¶

When using the aiohttp as PyWebIO backend server, you need to install aiohttp by yourself and make sure the version is not less than 3.1. You can install it with the following command:

pip3 install -U aiohttp>=3.1

pywebio.platform.aiohttp.webio_handler(applications, cdn=True, reconnect_timeout=0, allowed_origins=None, check_origin=None, websocket_settings=None)[source]¶

Get the Request Handler coroutine for running PyWebIO applications in aiohttp. The handler communicates with the browser by WebSocket protocol.

The arguments of webio_handler() have the same meaning as for pywebio.platform.aiohttp.start_server()

Returns: aiohttp Request Handler

pywebio.platform.aiohttp.start_server(applications, port=0, host='', debug=False, cdn=True, static_dir=None, remote_access=False, reconnect_timeout=0, allowed_origins=None, check_origin=None, auto_open_webbrowser=False, websocket_settings=None, **aiohttp_settings)[source]¶

Start a aiohttp server to provide the PyWebIO application as a web service.

پارامترها

websocket_settings (dict) -- The parameters passed to the constructor of aiohttp.web.WebSocketResponse. For details, please refer: https://docs.aiohttp.org/en/stable/web_reference.html#websocketresponse
aiohttp_settings -- Additional keyword arguments passed to the constructor of aiohttp.web.Application. For details, please refer: https://docs.aiohttp.org/en/stable/web_reference.html#application

The rest arguments of start_server() have the same meaning as for pywebio.platform.tornado.start_server()

پشتیبانی FastAPI/Starlette ¶

When using the FastAPI/Starlette as PyWebIO backend server, you need to install fastapi or starlette by yourself. Also other dependency packages are required. You can install them with the following command:

pip3 install -U fastapi starlette uvicorn aiofiles websockets

pywebio.platform.fastapi.webio_routes(applications, cdn=True, reconnect_timeout=0, allowed_origins=None, check_origin=None)[source]¶

Get the FastAPI/Starlette routes for running PyWebIO applications.

The API communicates with the browser using WebSocket protocol.

The arguments of webio_routes() have the same meaning as for pywebio.platform.fastapi.start_server()

جدید در نسخه 1.3.

Returns: FastAPI/Starlette routes

pywebio.platform.fastapi.asgi_app(applications, cdn=True, reconnect_timeout=0, static_dir=None, debug=False, allowed_origins=None, check_origin=None)[source]¶

Get the starlette/Fastapi ASGI app for running PyWebIO applications.

Use pywebio.platform.fastapi.webio_routes() if you prefer handling static files yourself.

The arguments of asgi_app() have the same meaning as for pywebio.platform.fastapi.start_server()

Example

To be used with FastAPI.mount() to include pywebio as a subapp into an existing Starlette/FastAPI application:

from fastapi import FastAPI
from pywebio.platform.fastapi import asgi_app
from pywebio.output import put_text
app = FastAPI()
subapp = asgi_app(lambda: put_text("hello from pywebio"))
app.mount("/pywebio", subapp)

Returns: Starlette/Fastapi ASGI app

جدید در نسخه 1.3.

pywebio.platform.fastapi.start_server(applications, port=0, host='', cdn=True, reconnect_timeout=0, static_dir=None, remote_access=False, debug=False, allowed_origins=None, check_origin=None, auto_open_webbrowser=False, **uvicorn_settings)[source]¶

Start a FastAPI/Starlette server using uvicorn to provide the PyWebIO application as a web service.

پارامترها

debug (bool) -- Boolean indicating if debug tracebacks should be returned on errors.
uvicorn_settings -- Additional keyword arguments passed to uvicorn.run(). For details, please refer: https://www.uvicorn.org/settings/

The rest arguments of start_server() have the same meaning as for pywebio.platform.tornado.start_server()

جدید در نسخه 1.3.

دیگر ¶

pywebio.config(*, title=None, description=None, theme=None, js_code=None, js_file=[], css_style=None, css_file=[])[source]¶

PyWebIO application configuration

پارامترها

title (str) -- Application title
description (str) -- Application description
theme (str) --
Application theme. Available themes are: dark, sketchy, minty, yeti. You can also use environment variable PYWEBIO_THEME to specify the theme (with high priority).

Theme preview demo

None
The dark theme is modified from ForEvolve's bootstrap-dark. The sketchy, minty and yeti theme are from bootswatch.
js_code (str) -- The javascript code that you want to inject to page.
js_file (str/list) -- The javascript files that inject to page, can be a URL in str or a list of it.
css_style (str) -- The CSS style that you want to inject to page.
css_file (str/list) -- The CSS files that inject to page, can be a URL in str or a list of it.

config() can be used in 2 ways: direct call and decorator. If you call config() directly, the configuration will be global. If you use config() as decorator, the configuration will only work on single PyWebIO application function.

config(title="My application")  # global configuration

@config(css_style="* { color:red }")  # only works on this application
def app():
    put_text("hello PyWebIO")

توجه

The configuration will affect all sessions

title and description are used for SEO, which are provided when indexed by search engines. If no title and description set for a PyWebIO application function, the docstring of the function will be used as title and description by default:

def app():
    """Application title

    Application description...
    (A empty line is used to separate the description and title)
    """
    pass

The above code is equal to:

@config(title="Application title", description="Application description...")
def app():
    pass

جدید در نسخه 1.4.

تغییر داده شده در نسخه 1.5: add theme parameter

pywebio.platform.run_event_loop(debug=False)[source]¶

run asyncio event loop

پارامترها: debug -- Set the debug mode of the event loop. See also: https://docs.python.org/3/library/asyncio-dev.html#asyncio-debug-mode

`pywebio.pin` --- ورودی مداوم¶

pin == Persistent input == Pinning input widget to the page

بررسی اجمالی¶

As you already know, the input function of PyWebIO is blocking and the input form will be destroyed after successful submission. In most cases, it enough to use this way to get input. However in some cases, you may want to make the input form not disappear after submission, and can continue to receive input.

So PyWebIO provides the pin module to achieve persistent input by pinning input widgets to the page.

The pin module achieves persistent input in 3 parts:

First, this module provides some pin widgets. Pin widgets are not different from output widgets in pywebio.output module, besides that they can also receive input.

This code outputs an text input pin widget:

put_input('input', label='This is a input widget')

In fact, the usage of pin widget function is same as the output function. You can use it as part of the combined output, or you can output pin widget to a scope:

put_row([
    put_input('input'),
    put_select('select', options=['A', 'B', 'C'])
])

with use_scope('search-area'):
    put_input('search', placeholder='Search')

Then, you can use the pin object to get the value of pin widget:

put_input('pin_name')
put_buttons(['Get Pin Value'], lambda _: put_text(pin.pin_name))

The first parameter that the pin widget function receives is the name of the pin widget. You can get the current value of the pin widget via the attribute of the same name of the pin object.

In addition, the pin object also supports getting the value of the pin widget by index, that is to say:

pin['pin_name'] == pin.pin_name

There are also two useful functions when you use the pin module: pin_wait_change() and pin_update().

Since the pin widget functions is not blocking, pin_wait_change() is used to wait for the value of one of a list of pin widget to change, it 's a blocking function.

pin_update() can be used to update attributes of pin widgets.

ویجت های Pin¶

Each pin widget function corresponds to an input function of input module. (For performance reasons, no pin widget for file_upload() input function)

The function of pin widget supports most of the parameters of the corresponding input function. Here lists the difference between the two in parameters:

The first parameter of pin widget function is always the name of the widget, and if you output two pin widgets with the same name, the previous one will expire.

Pin functions don't support the on_change and validate callbacks, and the required parameter. (There is a pin_on_change() function as an alternative to on_change)

Pin functions have additional scope and position parameters for output control.

pywebio.pin.put_input(name, type='text', *, label='', value=None, placeholder=None, readonly=None, datalist=None, help_text=None, scope=None, position=- 1) → pywebio.io_ctrl.Output[source]¶: Output an input widget. Refer to: pywebio.input.input()

pywebio.pin.put_textarea(name, *, label='', rows=6, code=None, maxlength=None, minlength=None, value=None, placeholder=None, readonly=None, help_text=None, scope=None, position=- 1) → pywebio.io_ctrl.Output[source]¶: Output a textarea widget. Refer to: pywebio.input.textarea()

pywebio.pin.put_select(name, options=None, *, label='', multiple=None, value=None, help_text=None, scope=None, position=- 1) → pywebio.io_ctrl.Output[source]¶: Output a select widget. Refer to: pywebio.input.select()

pywebio.pin.put_checkbox(name, options=None, *, label='', inline=None, value=None, help_text=None, scope=None, position=- 1) → pywebio.io_ctrl.Output[source]¶: Output a checkbox widget. Refer to: pywebio.input.checkbox()

pywebio.pin.put_radio(name, options=None, *, label='', inline=None, value=None, help_text=None, scope=None, position=- 1) → pywebio.io_ctrl.Output[source]¶: Output a radio widget. Refer to: pywebio.input.radio()

pywebio.pin.put_slider(name, *, label='', value=0, min_value=0, max_value=100, step=1, required=None, help_text=None, scope=None, position=- 1) → pywebio.io_ctrl.Output[source]¶: Output a slide widget. Refer to: pywebio.input.slider()

pywebio.pin.put_actions(name, *, label='', buttons=None, help_text=None, scope=None, position=- 1) → pywebio.io_ctrl.Output[source]¶

Output a group of action button. Refer to: pywebio.input.actions()

Unlike the actions(), put_actions() won't submit any form, it will only set the value of the pin widget. Only 'submit' type button is available in pin widget version.

جدید در نسخه 1.4.

Pin utils¶

pywebio.pin.pin¶

Pin widgets value getter and setter.

You can use attribute or key index of pin object to get the current value of a pin widget. By default, when accessing the value of a widget that does not exist, it returns None instead of throwing an exception.

You can also use the pin object to set the value of pin widget:

put_input('counter', type='number', value=0)

while True:
    pin.counter = pin.counter + 1  # Equivalent to: pin['counter'] = pin['counter'] + 1
    time.sleep(1)

Note: When using coroutine-based session, you need to use the await pin.name (or await pin['name']) syntax to get pin widget value.

Use pin.pin.use_strict() to enable strict mode for getting pin widget value. An AssertionError will be raised when try to get value of pin widgets that are currently not in the page.

pywebio.pin.pin_wait_change(*names, timeout=None)[source]¶

pin_wait_change() listens to a list of pin widgets, when the value of any widgets changes, the function returns with the name and value of the changed widget.

پارامترها

names (str) -- List of names of pin widget
timeout (int/None) -- If timeout is a positive number, pin_wait_change() blocks at most timeout seconds and returns None if no changes to the widgets within that time. Set to None (the default) to disable timeout.

Return dict/None

{"name": name of the changed widget, "value": current value of the changed widget } , when a timeout occurs, return None.

مثال:

put_input('a', type='number', value=0)
put_input('b', type='number', value=0)

while True:
    changed = pin_wait_change('a', 'b')
    with use_scope('res', clear=True):
        put_code(changed)
        put_text("a + b = %s" % (pin.a + pin.b))

Here is an demo of using pin_wait_change() to make a markdown previewer.

Note that: updating value with the pin object or pin_update() does not trigger pin_wait_change() to return.

When using coroutine-based session, you need to use the await pin_wait_change() syntax to invoke this function.

pywebio.pin.pin_update(name, **spec)[source]¶

Update attributes of pin widgets.

پارامترها

name (str) -- The name of the target input widget.
spec -- The pin widget parameters need to be updated. Note that those parameters can not be updated: type, name, code, multiple

pywebio.pin.pin_on_change(name, onchange=None, clear=False, init_run=False, **callback_options)[source]¶

Bind a callback function to pin widget, the function will be called when user change the value of the pin widget.

The onchange callback is invoked with one argument, the changed value of the pin widget. You can bind multiple functions to one pin widget, those functions will be invoked sequentially (default behavior, can be changed by clear parameter).

پارامترها

name (str) -- pin widget name
onchange (callable) -- callback function
clear (bool) -- whether to clear the previous callbacks bound to this pin widget. If you just want to clear callbacks and not set new callback, use pin_on_change(name, clear=True).
init_run (bool) -- whether to run the onchange callback once immediately before the pin widget changed. This parameter can be used to initialize the output.
callback_options -- Other options of the onclick callback. Refer to the callback_options parameter of put_buttons()

جدید در نسخه 1.6.

موضوع پیشرفته¶

This section will introduce the advanced features of PyWebIO.

Start multiple applications with start_server()¶

start_server() accepts a function as PyWebIO application. In addition, start_server() also accepts a list of application function or a dictionary of it to start multiple applications. You can use pywebio.session.go_app() or put_link() to jump between application:

def task_1():
    put_text('task_1')
    put_buttons(['Go task 2'], [lambda: go_app('task_2')])

def task_2():
    put_text('task_2')
    put_buttons(['Go task 1'], [lambda: go_app('task_1')])

def index():
    put_link('Go task 1', app='task_1')  # Use `app` parameter to specify the task name
    put_link('Go task 2', app='task_2')

# equal to `start_server({'index': index, 'task_1': task_1, 'task_2': task_2})`
start_server([index, task_1, task_2])

When the first parameter of start_server() is a dictionary, whose key is application name and value is application function. When it is a list, PyWebIO will use function name as application name.

You can select which application to access through the app URL parameter (for example, visit http://host:port/?app=foo to access the foo application), By default, the index application is opened when no app URL parameter provided. When the index application doesn't exist, PyWebIO will provide a default index application.

Integration with web framework¶

The PyWebIO application can be integrated into an existing Python Web project, the PyWebIO application and the Web project share a web framework. PyWebIO currently supports integration with Flask, Tornado, Django, aiohttp and FastAPI(Starlette) web frameworks.

The integration methods of those web frameworks are as follows:

Use pywebio.platform.tornado.webio_handler() to get the WebSocketHandler class for running PyWebIO applications in Tornado:

import tornado.ioloop
import tornado.web
from pywebio.platform.tornado import webio_handler

class MainHandler(tornado.web.RequestHandler):
    def get(self):
        self.write("Hello, world")

if __name__ == "__main__":
    application = tornado.web.Application([
        (r"/", MainHandler),
        (r"/tool", webio_handler(task_func)),  # `task_func` is PyWebIO task function
    ])
    application.listen(port=80, address='localhost')
    tornado.ioloop.IOLoop.current().start()

In above code, we add a routing rule to bind the WebSocketHandler of the PyWebIO application to the /tool path. After starting the Tornado server, you can visit http://localhost/tool to open the PyWebIO application.

دقت

PyWebIO uses the WebSocket protocol to communicate with the browser in Tornado. If your Tornado application is behind a reverse proxy (such as Nginx), you may need to configure the reverse proxy to support the WebSocket protocol. Here is an example of Nginx WebSocket configuration.

Use pywebio.platform.flask.webio_view() to get the view function for running PyWebIO applications in Flask:

from pywebio.platform.flask import webio_view
from flask import Flask

app = Flask(__name__)

# `task_func` is PyWebIO task function
app.add_url_rule('/tool', 'webio_view', webio_view(task_func),
            methods=['GET', 'POST', 'OPTIONS'])  # need GET,POST and OPTIONS methods

app.run(host='localhost', port=80)

In above code, we add a routing rule to bind the view function of the PyWebIO application to the /tool path. After starting the Flask application, visit http://localhost/tool to open the PyWebIO application.

Use pywebio.platform.django.webio_view() to get the view function for running PyWebIO applications in Django:

# urls.py

from django.urls import path
from pywebio.platform.django import webio_view

# `task_func` is PyWebIO task function
webio_view_func = webio_view(task_func)

urlpatterns = [
    path(r"tool", webio_view_func),
]

In above code, we add a routing rule to bind the view function of the PyWebIO application to the /tool path. After starting the Django server, visit http://localhost/tool to open the PyWebIO application

Use pywebio.platform.aiohttp.webio_handler() to get the Request Handler coroutine for running PyWebIO applications in aiohttp:

from aiohttp import web
from pywebio.platform.aiohttp import webio_handler

app = web.Application()
# `task_func` is PyWebIO task function
app.add_routes([web.get('/tool', webio_handler(task_func))])

web.run_app(app, host='localhost', port=80)

After starting the aiohttp server, visit http://localhost/tool to open the PyWebIO application

دقت

PyWebIO uses the WebSocket protocol to communicate with the browser in aiohttp. If your aiohttp server is behind a reverse proxy (such as Nginx), you may need to configure the reverse proxy to support the WebSocket protocol. Here is an example of Nginx WebSocket configuration.

Use pywebio.platform.fastapi.webio_routes() to get the FastAPI/Starlette routes for running PyWebIO applications. You can mount the routes to your FastAPI/Starlette app.

FastAPI:

from fastapi import FastAPI
from pywebio.platform.fastapi import webio_routes

app = FastAPI()

@app.get("/app")
def read_main():
   return {"message": "Hello World from main app"}

# `task_func` is PyWebIO task function
app.mount("/tool", FastAPI(routes=webio_routes(task_func)))

Starlette:

from starlette.applications import Starlette
from starlette.responses import JSONResponse
from starlette.routing import Route, Mount
from pywebio.platform.fastapi import webio_routes

async def homepage(request):
   return JSONResponse({'hello': 'world'})

app = Starlette(routes=[
   Route('/', homepage),
   Mount('/tool', routes=webio_routes(task_func))  # `task_func` is PyWebIO task function
])

After starting the server by using uvicorn <module>:app , visit http://localhost:8000/tool/ to open the PyWebIO application

Notes¶

Deployment in production

In your production system, you may want to deploy the web applications with some WSGI/ASGI servers such as uWSGI, Gunicorn, and Uvicorn. Since PyWebIO applications store session state in memory of process, when you use HTTP-based sessions (Flask and Django) and spawn multiple workers to handle requests, the request may be dispatched to a process that does not hold the session to which the request belongs. So you can only start one worker to handle requests when using Flask or Django backend.

If you still want to use multiple processes to increase concurrency, one way is to use Uvicorn+FastAPI, or you can also start multiple Tornado/aiohttp processes and add external load balancer (such as HAProxy or nginx) before them. Those backends use the WebSocket protocol to communicate with the browser in PyWebIO, so there is no the issue as described above.

Static resources Hosting

By default, the front-end of PyWebIO gets required static resources from CDN. If you want to deploy PyWebIO applications in an offline environment, you need to host static files by yourself, and set the cdn parameter of webio_view() or webio_handler() to False.

When setting cdn=False , you need to host the static resources in the same directory as the PyWebIO application. In addition, you can also pass a string to cdn parameter to directly set the URL of PyWebIO static resources directory.

The path of the static file of PyWebIO is stored in pywebio.STATIC_PATH, you can use the command python3 -c "import pywebio; print(pywebio.STATIC_PATH)" to print it out.

توجه

start_server() and path_deploy() also support cdn parameter, if it is set to False, the static resource will be hosted in local server automatically, without manual hosting.

Coroutine-based session¶

In most cases, you don’t need the coroutine-based session. All functions or methods in PyWebIO that are only used for coroutine sessions are specifically noted in the document.

PyWebIO's session is based on thread by default. Each time a user opens a session connection to the server, PyWebIO will start a thread to run the task function. In addition to thread-based sessions, PyWebIO also provides coroutine-based sessions. Coroutine-based sessions accept coroutine functions as task functions.

The session based on the coroutine is a single-thread model, which means that all sessions run in a single thread. For IO-bound tasks, coroutines take up fewer resources than threads and have performance comparable to threads. In addition, the context switching of the coroutine is predictable, which can reduce the need for program synchronization and locking, and can effectively avoid most critical section problems.

Using coroutine session¶

To use coroutine-based session, you need to use the async keyword to declare the task function as a coroutine function, and use the await syntax to call the PyWebIO input function:

 from pywebio.input import *
 from pywebio.output import *
 from pywebio import start_server

 async def say_hello():
     name = await input("what's your name?")
     put_text('Hello, %s' % name)

 start_server(say_hello, auto_open_webbrowser=True)

In the coroutine task function, you can also use await to call other coroutines or (awaitable objects) in the standard library asyncio:

 import asyncio
 from pywebio import start_server

 async def hello_word():
     put_text('Hello ...')
     await asyncio.sleep(1)  # await awaitable objects in asyncio
     put_text('... World!')

 async def main():
     await hello_word()  # await coroutine
     put_text('Bye, bye')

 start_server(main, auto_open_webbrowser=True)

دقت

In coroutine-based session, all input functions defined in the pywebio.input module need to use await syntax to get the return value. Forgetting to use await will be a common error when using coroutine-based session.

Other functions that need to use await syntax in the coroutine session are:

pywebio.session.run_asyncio_coroutine(coro_obj)

pywebio.session.eval_js(expression)

هشدار

Although the PyWebIO coroutine session is compatible with the awaitable objects in the standard library asyncio, the asyncio library is not compatible with the awaitable objects in the PyWebIO coroutine session.

That is to say, you can't pass PyWebIO awaitable objects to the asyncio functions that accept awaitable objects. For example, the following calls are not supported

await asyncio.shield(pywebio.input())
await asyncio.gather(asyncio.sleep(1), pywebio.session.eval_js('1+1'))
task = asyncio.create_task(pywebio.input())

Concurrency in coroutine-based sessions¶

In coroutine-based session, you can start new thread, but you cannot call PyWebIO interactive functions in it (register_thread() is not available in coroutine session). But you can use run_async(coro) to execute a coroutine object asynchronously, and PyWebIO interactive functions can be used in the new coroutine:

 from pywebio import start_server
 from pywebio.session import run_async

 async def counter(n):
     for i in range(n):
         put_text(i)
         await asyncio.sleep(1)

 async def main():
     run_async(counter(10))
     put_text('Main coroutine function exited.')


 start_server(main, auto_open_webbrowser=True)

run_async(coro) returns a TaskHandler, which can be used to query the running status of the coroutine or close the coroutine.

Close of session¶

Similar to thread-based session, when user close the browser page, the session will be closed.

After the browser page closed, PyWebIO input function calls that have not yet returned in the current session will cause SessionClosedException, and subsequent calls to PyWebIO interactive functions will cause SessionNotFoundException or SessionClosedException.

defer_call(func) also available in coroutine session.

Integration with Web Framework¶

The PyWebIO application that using coroutine-based session can also be integrated to the web framework.

However, there are some limitations when using coroutine-based sessions to integrate into Flask or Django:

First, when await the coroutine objects/awaitable objects in the asyncio module, you need to use run_asyncio_coroutine() to wrap the coroutine object.

Secondly, you need to start a new thread to run the event loop before starting a Flask/Django server.

Example of coroutine-based session integration into Flask:

 import asyncio
 import threading
 from flask import Flask, send_from_directory
 from pywebio import STATIC_PATH
 from pywebio.output import *
 from pywebio.platform.flask import webio_view
 from pywebio.platform import run_event_loop
 from pywebio.session import run_asyncio_coroutine

 async def hello_word():
     put_text('Hello ...')
     await run_asyncio_coroutine(asyncio.sleep(1))  # can't just "await asyncio.sleep(1)"
     put_text('... World!')

 app = Flask(__name__)
 app.add_url_rule('/hello', 'webio_view', webio_view(hello_word),
                             methods=['GET', 'POST', 'OPTIONS'])

 # thread to run event loop
 threading.Thread(target=run_event_loop, daemon=True).start()
 app.run(host='localhost', port=80)

Finally, coroutine-based session is not available in the script mode. You always need to use start_server() to run coroutine task function or integrate it to a web framework.

پشتیبانی کتابخانه ها¶

ساخت اپ مستقل¶

PyInstaller bundles a Python application and all its dependencies into a folder or executable. The user can run the packaged app without installing a Python interpreter or any modules.

You can use PyInstaller to packages PyWebIO application into a stand-alone executable or folder:

Create a pyinstaller spec (specification) file:
```
pyi-makespec <options> app.py
```
You need replace app.py to your PyWebIO application file name.

Edit the spec file, change the datas parameter of Analysis:

from pywebio.utils import pyinstaller_datas

a = Analysis(
    ...
    datas=pyinstaller_datas(),
    ...

Build the application by passing the spec file to the pyinstaller command:
```
pyinstaller app.spec
```

If you want to create a one-file bundled executable, you need pass --onefile option in first step.

For more information, please visit: https://pyinstaller.readthedocs.io/en/stable/spec-files.html

بصری سازی داده¶

PyWebIO supports for data visualization with the third-party libraries.

Bokeh¶

Bokeh is an interactive visualization library for modern web browsers. It provides elegant, concise construction of versatile graphics, and affords high-performance interactivity over large or streaming datasets.

You can use bokeh.io.output_notebook(notebook_type='pywebio') in the PyWebIO session to setup Bokeh environment. Then you can use bokeh.io.show() to output a boken chart:

from bokeh.io import output_notebook
from bokeh.io import show

output_notebook(notebook_type='pywebio')
fig = figure(...)
...
show(fig)

See related demo on bokeh demo

In addition to creating ordinary charts, Bokeh can also build the Bokeh applications by starting the Bokeh server. The purpose of the Bokeh server is to make it easy for Python users to create interactive web applications that can connect front-end UI events to real, running Python code.

In PyWebIO, you can also use bokeh.io.show() to display a Bokeh App. For the example, see bokeh_app.py.

توجه

Bokeh App currently is only available in the default Tornado backend

https://fastly.jsdelivr.net/gh/wang0618/pywebio-chart-gallery@master/assets/bokeh.png

pyecharts¶

pyecharts is a python plotting library which uses Echarts as underlying implementation.

In PyWebIO, you can use the following code to output the pyecharts chart instance:

# `chart` is pyecharts chart instance
pywebio.output.put_html(chart.render_notebook())

See related demo on pyecharts demo

https://fastly.jsdelivr.net/gh/wang0618/pywebio-chart-gallery@master/assets/pyecharts.gif

plotly¶

plotly.py is an interactive, open-source, and browser-based graphing library for Python.

In PyWebIO, you can use the following code to output the plotly chart instance:

# `fig` is plotly chart instance
html = fig.to_html(include_plotlyjs="require", full_html=False)
pywebio.output.put_html(html)

See related demo on plotly demo

https://fastly.jsdelivr.net/gh/wang0618/pywebio-chart-gallery@master/assets/plotly.png

pyg2plot¶

pyg2plot is a python plotting library which uses G2Plot as underlying implementation.

In PyWebIO, you can use the following code to output the pyg2plot chart instance:

# `chart` is pyg2plot chart instance
pywebio.output.put_html(chart.render_notebook())

See related demo on plotly demo

cutecharts.py¶

cutecharts.py is a hand drawing style charts library for Python which uses chart.xkcd as underlying implementation.

In PyWebIO, you can use the following code to output the cutecharts.py chart instance:

# `chart` is cutecharts chart instance
pywebio.output.put_html(chart.render_notebook())

See related demo on cutecharts demo

https://fastly.jsdelivr.net/gh/wang0618/pywebio-chart-gallery@master/assets/cutecharts.png

دستور های پخت¶

همچنین ملاحظه نمائید

PyWebIO Battery

Interaction related
Web application related
- Add Google AdSense/Analytics code
- Refresh page on connection lost

یادداشت های انتشار¶

What's new in PyWebIO 1.7¶

2022/10/17¶

Highlights¶

add session reconnect to aiohttp and fastapi backends (now, all platforms support session reconnect)

تغییرات جزئی¶

auto use local static when CND is not available
refine use_scope(clear=True) to avoid page flashing

رفع باگ¶

fix: textarea(code=True, required=True) can't submit
fix: auto hold don't work on script mode
fix (#389): put_select() was hidden by put_tabs()
fix: input_update(datalist) don't work when datalist is not provided in input()
fix (#459): code textarea onchange fired when set value
fix (#453): put_table() error when table data is empty with rich header
fix load old static resource after version upgrade
fix cancel type raise error in single action()
fix (#377): error on nested onchange callback
fix (#468): can't reset select()
fix set_env(output_animation=False) don't work for image

What's new in PyWebIO 1.6¶

2022/3/23¶

Highlights¶

add pywebio.pin.pin_on_change()

تغییرات جزئی¶

use bootstrap-select to provide more user-friendly select input
add pin.pin.use_strict() to enable strict mode for getting pin widget value
Persian language support for default labels, thanks to Pikhosh
add color input type (#310)
add input check on number and float type input

رفع باگ¶

fix: uncaught SessionClosedException in callback of thread-based session
fix(#313): slider value label don't sync when set value

v1.6.1 (2022/5/22)¶

fix (#380): put_processbar() don't work when name contains space
fix (#385): bootstrap-select issue
fix (#389): put_select() was hidden by put_tabs()
fix auto hold don't work on script mode
provide a fallback way when CDN is not available

v1.6.2 (2022/7/16)¶

fix: plotly.js version error due to outdated CDN link

موارد جدید در PyWebIO 1.5¶

۱۴۰۰/۰۸/۲۹¶

Highlights¶

theme support via pywebio.config(), demo
deprecate pywebio.output.output(), use pywebio.output.use_scope() instead (output() still work)

تغییرات جزئی¶

enable lstrip by default in put_markdown(), and the behavior of lstrip is more clever than previous version. Deprecate strip_indent since lstrip is sufficient.
button disabled state support in pywebio.output.put_buttons() and pywebio.output.put_button(), and button value can be any type
buttons in pywebio.input.actions() support color setting
russian language support for frontend labels and messages. Thanks to @Priler.
improve default index page of pywebio.platform.path_deploy(): improve pywebio app detection and show app title.
compatible with latest aiohttp(v3.8)
enable websocket_ping_interval by default in tornado server to avoid idle connections being close in some cloud platform (like heroku)
exception traceback will be show in page when enable debug
slider input add indicator to show its current value

رفع باگ¶

deep copy options and buttons parameters to avoid potential error - 81d57ba4, cb5ac8d5 - e262ea43
fix page width exceeding screen width (mostly on mobile devices) - 536d09e3
fix put_buttons() issue when buttons have same value - cb5ac8d5
fix layout issue when use put_markdown() - 364059ae
fix style issue in put_tabs() widget - f056f1ac
fix sibling import issue in path_deploy() - 35209a7e
fix "Address already in use" error when enable remote access in some cases - 8dd9877d

v1.5.1 (۱۴۰۰/۰۹/۳۰)¶

fix setitem error of pin.pin object - 3f5cf1e5
fix thread-based session tot closed properly - 22fbbf86..3bc7d36b>
fix OverflowError on 32-bit Windows - 4ac7f0e5
fix a sample error from cookbook - 99593db4
fix spawn 2 remote access processes when enable debug in flask backed - 073f8ace

v1.5.2 (۱۴۰۰/۱۰/۰۹)¶

fix #243: thread keep alive after session closed
fix #247: can't use coroutine callback in put_button()

موارد جدید در PyWebIO 1.4¶

۱۴۰۰/۰۷/۱۲¶

Highlights¶

automatically hold session when needed
support for binding onclick callback on any output widget

تغییرات جزئی¶

migrate to a open-source remote access service
add output_max_width parameter to set_env()
can use Esc/F11 to toggle fullscreen of codemirror textarea
pin_wait_change() support timeout parameter
add pywebio.config()
add pywebio.output.put_button()
add pywebio.pin.put_actions()
rearrange document

رفع باگ¶

fix(#148): form can't be submit after validation failed - e262ea43
fix some codemirror issues: codemirror refresh and mode auto load - b7957891, 50cc41a9
fix: run_js() return None when empty-value - 89ce352d
fix: whole output crash when a sub output fail - 31b26d09

موارد جدید در PyWebIO 1.3¶

۱۴۰۰/۰۳/۲۲¶

Highlights¶

New module pin to provide persistent input support.
Add a remote access service to start_server(). See server mode - User Guide for detail.
Add input_update(), add onchange callback in input functions.
Add support for FastAPI and Starlette.

تغییرات جزئی¶

input module
- Add input_update(), add onchange callback in input functions.
- Add pywebio.input.slider() to get range input.
output module
- Mark style() as deprecated, see style - User Guide for new method.
- Add pywebio.output.put_tabs() to output tabs.
- put_html() adds compatibility with ipython rich output.
- Add group and outline parameters in put_buttons().
session module
- Add promise support in eval_js().
- Support config input panel via set_env().
platform module
- Add support for FastAPI and Starlette.
- Add wsgi_app() / asgi_app() for Flask/Dgango/FastAPI backend.
- Add remote access service to start_server()
- Add max_file_upload/payload_size_limit/upload_size_limit/max_payload_size parameters to start_server().
So many other improvements.

رفع باگ¶

Fix table style.
Fix large file uploading error.
Fix server start error when enabled auto_open_webbrowser.
Fix file names overflow in file input.
Fix put_image() raise 'unknown file extension' error when use PIL Image as src.
Sanitize the returned filename of file_upload() to avoid interpreting as path accidentally.
So many other bugs fixed.

موارد جدید در PyWebIO 1.2¶

۱۳۹۹ ۱۲/۲۸¶

Highlights¶

Support reconnect to server in websocket connection by setting reconnect_timeout parameter in start_server().
Add path_deploy(), path_deploy_http() and pywebio-path-deploy command to deploy PyWebIO applications from a directory.
All documents and demos are now available in English version.
Some output-related functions support context manager, see output functions list .

تغییرات جزئی¶

Add put_info(), put_error(), put_warning(), put_success()
Add pywebio.utils.pyinstaller_datas() to get PyWebIO data files when using pyinstaller to bundle PyWebIO application.
Add documentation for data visualization using pyg2plot.
The reset(), append(), insert() of output() accept any type as content.
Add static_dir parameter to start_server() to serve static files.
Deprecated pywebio.session.get_info(), use pywebio.session.info instead.
Alert not supporting message when the user using IE browser.

موارد جدید در PyWebIO 1.1¶

۱۳۹۹ ۱۱/۱۹¶

It's been a whole year since the first line of PyWebIO code was written. 🎂 There have been too many things in 2020, but it has a special meaning to me. In 2021, we will continue to work hard to make PyWebIO better and better.

Highlights¶

Security support: put_html(), put_markdown() can use sanitize parameter to prevent XSS attack.
UI internationalization support
SEO support: Set SEO info through pywebio.platform.seo() or function docstring
CDN support, more convenient to web framework integration
Application access speed is improved, and no probe requests are used to determine the communication protocol

Backwards-incompatible changes¶

Remove disable_asyncio parameter of start_server() in django and flask.
Deprecated pywebio.session.data(), use pywebio.session.local instead
Application integrated into the web framework, the access address changes, see Web framework integration
Remove max_height parameter of put_scrollable(), use height instead

تغییرات جزئی¶

put_code() add rows parameter to limit the maximum number of displayed lines
put_scrollable() add keep_bottom parameter
put_markdown() add options to config Markdown parsing options.
Add html escaping for parameters of put_code(), put_image(), put_link(), put_row(), put_grid()
Methods reset(), append(), insert() of output() accept string content
Fix: Parsing error in max_size and max_total_size parameters of file_upload()
Fix: Auto open browser failed in python 3.6

موارد جدید در PyWebIO 1.0¶

۱۳۹۹ ۱۰/۲۸¶

经过快一年的开发，PyWebIO 1.0 终于完成了。与上一版本 v0.3 相比有非常多的变化：

Highlights¶

start_server 对多任务函数的支持，PyWebIO应用可以包含多个任务函数，并提供了 go_app() 用于任务函数之间的跳转
不再使用基于锚点的输出控制模型，改用基于Scope的模型
添加布局支持（ put_grid() , put_row() , put_column() ）和自定义样式支持（ style() ）
添加新的输出函数: toast() , popup() , put_widget() , put_collapse() , put_link() , put_scrollable() , put_loading() , put_processbar()
添加 span() , output() 输出控制函数
添加JS执行函数: run_js() , eval_js()
更新UI: 显示输入时，使用浮动式输入框；发生未捕获异常时，前端使用console日志记录异常

Backwards-incompatible changes¶

不再使用基于锚点的输出控制模型
不支持固定高度的输出区，移除 pywebio.output.set_output_fixed_height()
移除 pywebio.output.set_title() , pywebio.output.set_auto_scroll_bottom()，改用 pywebio.session.set_env() 进行控制
移除 pywebio.output.table_cell_buttons() ，使用 pywebio.output.put_buttons() 替代

Detailed changes by module¶

input() 支持 action 参数动态设置输入项的值
file_upload() 支持多文件上传，支持限制上传文件大小，添加上传进度显示
put_buttons() 支持指定按钮颜色
put_widget() 、 popup() 、 put_table() 将字符串内容不再视作Html，而是作为纯文本
put_text() 支持输出多个对象
put_image() 支持使用Url指定图片

موارد جدید در PyWebIO 0.3¶

۱۳۹۹ ۰۲/۲۴¶

Highlights¶

支持输出 bokeh 数据可视化图表，文档
添加 session.get_info() 获取会话相关信息
前端js代码迁移typescript
output.put_table() 支持跨行/列单元格，单元格内容支持使用 put_xxx 类输出函数

Detailed changes by module¶

رابط کاربری¶

当与服务器连接断开时，点击前端的交互式按钮会报错提示。

pywebio.output¶

锚点名字支持使用空格
弃用 table_cell_buttons()

موارد جدید در PyWebIO 0.2¶

۱۳۹۹ ۰۲/۱۱¶

Highlights¶

支持与Django、aiohttp Web框架整合
支持使用 plotly、pyecharts 等第三方库进行数据可视化
与Web框架整合时支持同时使用基于线程和协程的会话实现
添加 defer_call() 、 hold() 会话控制函数
添加 put_image() 输出图像、 remove(anchor) 移除内容
加入动画提升UI体验
添加测试用例，构建CI工作流

Detailed changes by module¶

رابط کاربری¶

添加元素显示动画
页面底部添加footer

pywebio.input¶

input_group() 添加 cancelable 参数来允许用户取消输入
actions() 函数 button 参数支持 reset 和 cancel 按钮类型

pywebio.output¶

输出函数使用 anchor 参数指定输出锚点时，若锚点已经存在，则将锚点处的内容替换为当前内容。
clear_range() 添加添加锚点存在检查
scroll_to(anchor, position) 添加 position 参数精细化控制滚动位置

pywebio.platform¶

start_server 和 webio_view 、 webio_handle 添加跨域支持

pywebio.session¶

Session 关闭时，清理更彻底：任何还在进行的PyWebIO调用都会抛出 SessionClosedException 异常
fix: Session 对象构造函数无法识别 functools.partial 处理的任务函数

`pywebio_battery` --- PyWebIO battery¶

Utilities that help write PyWebIO apps quickly and easily.

توجه

pywebio_battery is an extension package of PyWebIO, you must install it before using it. To install this package, run pip3 install -U pywebio-battery

Functions list¶

Web application related¶

Function name	Description
`get_all_query`, `get_query`	Get URL parameter
`set_localstorage`, `get_localstorage`	User browser storage
`set_cookie`, `get_cookie`	Web Cookie
`basic_auth`, `custom_auth`, `revoke_auth`	Authentication

pywebio_battery.confirm(title: str, content: Optional[Union[str, pywebio.io_ctrl.Output, Sequence[Union[str, pywebio.io_ctrl.Output]]]] = None, *, timeout: Optional[int] = None) → Optional[bool][source]¶

Show a confirmation modal.

پارامترها

title (str) -- Model title.
content (list/put_xxx()/str) -- The content of the confirmation modal. Can be a string, the put_xxx() calls , or a list of them.
timeout (None/float) -- Seconds for operation time out.

Returns

Return True when the "CONFIRM" button is clicked, return False when the "CANCEL" button is clicked, return None when a timeout is given and the operation times out.

choice = confirm("Delete File", "Are you sure to delete this file?")
put_text("Your choice", choice)

pywebio_battery.popup_input(pins: Sequence[pywebio.io_ctrl.Output], title='Please fill out the form below') → Optional[dict][source]¶

Show a form in popup window.

پارامترها

pins (list) -- pin widget list. It can also contain ordinary output widgets.
title (str) -- model title.

Returns

return the form value as dict, return None when user cancel the form.

pywebio_battery.redirect_stdout(output_func=functools.partial(<function put_text>, inline=True))[source]¶

Context manager for temporarily redirecting stdout to pywebio.

with redirect_stdout():
    print("Hello world.")

pywebio_battery.run_shell(cmd: str, output_func=functools.partial(<function put_text>, inline=True), encoding='utf8') → int[source]¶

Run command in shell and output the result to pywebio

پارامترها

cmd (str) -- command to run
output_func (callable) -- output function, default to put_text(). the function should accept one argument, the output text of command.
encoding (str) -- command output encoding

Returns

shell command return code

تغییر داده شده در نسخه 0.4: add encoding parameter and return code

pywebio_battery.put_logbox(name: str, height=400, keep_bottom=True) → pywebio.io_ctrl.Output[source]¶

Output a logbox widget

import time

put_logbox("log")
while True:
    logbox_append("log", f"{time.time()}\n")
    time.sleep(0.2)

پارامترها

name (str) -- the name of the widget, must unique in session-wide.
height (int) -- the height of the widget in pixel
keep_bottom (bool) -- Whether to scroll to bottom when new content is appended (via logbox_append()).

تغییر داده شده در نسخه 0.3: add keep_bottom parameter

pywebio_battery.logbox_append(name: str, text: str)[source]¶: Append text to a logbox widget

pywebio_battery.put_video(src: Union[str, bytes], autoplay: bool = False, loop: bool = False, height: Optional[int] = None, width: Optional[int] = None, muted: bool = False, poster: Optional[str] = None, scope: Optional[str] = None, position: int = - 1) → pywebio.io_ctrl.Output[source]¶

Output video

پارامترها

src (str/bytes) -- Source of video. It can be a string specifying video URL, a bytes-like object specifying the binary content of the video.
autoplay (bool) -- Whether to autoplay the video. In some browsers (e.g. Chrome 70.0) autoplay doesn't work if not enable muted.
loop (bool) -- If True, the browser will automatically seek back to the start upon reaching the end of the video.
width (int) -- The width of the video's display area, in CSS pixels. If not specified, the intrinsic width of the video is used.
height (int) -- The height of the video's display area, in CSS pixels. If not specified, the intrinsic height of the video is used.
muted (bool) -- If set, the audio will be initially silenced.
poster (str) -- A URL for an image to be shown while the video is downloading. If this attribute isn't specified, nothing is displayed until the first frame is available, then the first frame is shown as the poster frame.
scope, position (int) -- Those arguments have the same meaning as for put_text()

Example:

url = "https://interactive-examples.mdn.mozilla.net/media/cc0-videos/flower.mp4"
put_video(url)

جدید در نسخه 0.4.

pywebio_battery.put_audio(src: Union[str, bytes], autoplay: bool = False, loop: bool = False, muted: bool = False, scope: Optional[str] = None, position: int = - 1) → pywebio.io_ctrl.Output[source]¶

Output audio

پارامترها

src (str/bytes) -- Source of audio. It can be a string specifying video URL, a bytes-like object specifying the binary content of the audio.
autoplay (bool) -- Whether to autoplay the audio.
loop (bool) -- If True, the browser will automatically seek back to the start upon reaching the end of the audio.
muted (bool) -- If set, the audio will be initially silenced.
scope -- The scope of the video. It can be "session" or "page". If not specified, the video will be automatically removed when the session is closed.
scope, position (int) -- Those arguments have the same meaning as for put_text()

Example:

url = "https://interactive-examples.mdn.mozilla.net/media/cc0-audio/t-rex-roar.mp3"
put_audio(url)

جدید در نسخه 0.4.

pywebio_battery.get_all_query()[source]¶: Get URL parameter (also known as "query strings" or "URL query parameters") as a dict

pywebio_battery.get_query(name: str)[source]¶: Get URL parameter value

pywebio_battery.set_localstorage(key: str, value: str)[source]¶

Save data to user's web browser

The data is specific to the origin (protocol+domain+port) of the app. Different origins use different web browser local storage.

پارامترها

key -- the key you want to create/update.
value -- the value you want to give the key you are creating/updating.

You can read the value by using get_localstorage(key)

pywebio_battery.get_localstorage(key: str) → str[source]¶: Get the key's value in user's web browser local storage

pywebio_battery.set_cookie(key: str, value: str, days=7)[source]¶: Set cookie

pywebio_battery.get_cookie(key: str)[source]¶: Get cookie

pywebio_battery.basic_auth(verify_func: Callable[[str, str], bool], secret: Union[str, bytes], expire_days=7, token_name='pywebio_auth_token') → str[source]¶

Persistence authentication with username and password.

You need to provide a function to verify the current user based on username and password. The basic_auth() function will save the authentication state in the user's web browser, so that the authed user does not need to log in again.

پارامترها

verify_func (callable) -- User authentication function. It should receive two arguments: username and password. If the authentication is successful, it should return True, otherwise return False.
secret (str) -- HMAC secret for the signature. It should be a long, random str.
expire_days (int) -- how many days the auth state can keep valid. After this time, authed users need to log in again.
token_name (str) -- the name of the token to store the auth state in user browser.

Return str

username of the current authed user

Example:

user_name = basic_auth(lambda username, password: username == 'admin' and password == '123',
                       secret="__TODO:_GENERATE_YOUR_OWN_RANDOM_VALUE_HERE__")
put_text("Hello, %s. You can refresh this page and see what happen" % user_name)

جدید در نسخه 0.4.

pywebio_battery.custom_auth(login_func: Callable[], str], secret=typing.Union[str, bytes], expire_days=7, token_name='pywebio_auth_token') → str[source]¶

Persistence authentication with custom logic.

You need to provide a function to determine the current user and return the username. The custom_auth() function will save the authentication state in the user's web browser, so that the authed user does not need to log in again.

پارامترها

login_func (callable) -- User login function. It should receive no arguments and return the username of the current user. If fail to verify the current user, it should return None.
secret (str) -- HMAC secret for the signature. It should be a long, random str.
expire_days (int) -- how many days the auth state can keep valid. After this time,authed users need to log in again.
token_name (str) -- the name of the token to store the auth state in user browser.

Return str

username of the current authed user.

جدید در نسخه 0.4.

pywebio_battery.revoke_auth(token_name='pywebio_auth_token')[source]¶

Revoke the auth state of current user

پارامترها: token_name (str) -- the name of the token to store the auth state in user browser.

جدید در نسخه 0.4.

پروتکل ارتباط سرور-کلاینت¶

PyWebIO uses a server-client architecture, the server executes task code, and interacts with the client (that is, the user browser) through the network. This section introduce the protocol specification for the communication between PyWebIO server and client.

There are two communication methods between server and client: WebSocket and Http.

When using Tornado or aiohttp backend, the server and client communicate through WebSocket, when using Flask or Django backend, the server and client communicate through Http.

WebSocket communication

The server and the client send json-serialized message through WebSocket connection

Http communication

The client polls the backend through Http GET requests, and the backend returns a list of PyWebIO messages serialized in json
When the user submits the form or clicks the button, the client submits data to the backend through Http POST request

In the following, the data sent by the server to the client is called command, and the data sent by the client to the server is called event.

The following describes the format of command and event

Command¶

Command is sent by the server to the client. The basic format of command is:

{
    "command": ""
    "task_id": ""
    "spec": {}
}

Each fields are described as follows:

command : command name

task_id : Id of the task that send the command

spec : the data of the command, which is different depending on the command name

Note that: the arguments shown above are merely the same with the parameters of corresponding PyWebIO functions, but there are some differences.

The following describes the spec fields of different commands:

input_group¶

Show a form in user's browser.

fields of `spec`¶
Field	Required	Type	Description
label	False	str	Title of the form
inputs	True	list	Input items
cancelable	False	bool	Whether the form can be cancelled。 If cancelable=True, a “Cancel” button will be displayed at the bottom of the form. A `from_cancel` event is triggered after the user clicks the cancel button.

The inputs field is a list of input items, each input item is a dict, the fields of the item are as follows:

label: Label of input field, required.
type: Input type, required.
name: Identifier of the input field, required.
onchange: bool, whether to push input value when input change
onbulr: bool, whether to push input value when input field onblur
auto_focus: Set focus automatically. At most one item of auto_focus can be true in the input item list
help_text: Help text for the input
Additional HTML attribute of the input element
Other attributes of different input types

Currently supported type are:

text: Plain text input
number: Number input
password: Password input
checkbox: Checkbox
radio: Radio
select: Drop-down selection
textarea: Multi-line text input
file: File uploading
actions: Actions selection.

Correspondence between different input types and html input elements:

text: input[type=text]
number: input[type=number]
float: input[type=text], and transform input value to float
password: input[type=password]
checkbox: input[type=checkbox]
radio: input[type=radio]
select: select https://developer.mozilla.org/zh-CN/docs/Web/HTML/Element/select
textarea: textarea https://developer.mozilla.org/zh-CN/docs/Web/HTML/Element/textarea
file: input[type=file]
actions: button[type=submit] https://developer.mozilla.org/zh-CN/docs/Web/HTML/Element/button

Unique attributes of different input types:

text,number,password:
- action: Display a button on the right of the input field. The format of action is {label: button label, callback_id: button click callback id}
textarea:
- code: Codemirror options or boolean, same as code parameter of pywebio.input.textarea()
select：
- options: {label:, value: , [selected:,] [disabled:]}
checkbox:
- options: {label:, value: , [selected:,] [disabled:]}
- inline
radio:
- options: {label:, value: , [selected:,] [disabled:]}
- inline
actions
- buttons: {label:, value:, [type: 'submit'/'reset'/'cancel'], [disabled:], [color:]} .
file:
- multiple: Whether to allow upload multiple files.
- max_size: The maximum size of a single file, in bytes.
- max_total_size: The maximum size of all files, in bytes.
slider
- min_value: The minimum permitted value.
- max_value: The maximum permitted value.
- step: The stepping interval.
- float: If need return a float value

update_input¶

Update the input item, you can update the spec of the input item of the currently displayed form

The spec fields of update_input commands:

target_name: str The name of the target input item.
target_value: str, optional. Used to filter item in checkbox, radio
attributes: dist, fields need to be updated
- valid_status: When it is bool, it means setting the state of the input value, pass/fail; when it is 0, it means clear the valid_status flag
- value: Set the value of the item
- label
- placeholder
- invalid_feedback
- valid_feedback
- help_text
- options: only available in checkbox, radio and select type
- other fields of item's spec // not support the inline field

close_session¶

Indicates that the server has closed the connection. spec of the command is empty.

set_session_id¶

Send current session id to client, used to reconnect to server (Only available in websocket connection). spec of the command is session id.

destroy_form¶

Destroy the current form. spec of the command is empty.

Note: The form will not be automatically destroyed after it is submitted, it needs to be explicitly destroyed using this command

output¶

Output content

The spec fields of output commands:

type: content type
style: str, Additional css style
container_selector: The css selector of output widget's content slot. If empty(default), use widget self as container
container_dom_id: The dom id need to be set to output widget's content slot.
scope: str, CSS selector of the output container. If multiple containers are matched, the content will be output to every matched container
position: int, see scope - User manual
click_callback_id:
Other attributes of different types

container_selector and container_dom_id is used to implement output context manager.

Unique attributes of different types:

type: markdown
- content: str
- options: dict, marked.js options
- sanitize: bool, Whether to enable a XSS sanitizer for HTML
type: html
- content: str
- sanitize: bool, Whether to enable a XSS sanitizer for HTML
type: text
- content: str
- inline: bool, Use text as an inline element (no line break at the end of the text)
type: buttons
- callback_id:
- buttons:[ {value:, label:, [color:], [disabled:]},...]
- small: bool, Whether to enable small button
- group: bool, Whether to group the buttons together
- link: bool, Whether to make button seem as link.
- outline: bool, Whether enable outline style.
type: file
- name: File name when downloading
- content: File content with base64 encoded
type: table
- data: Table data, which is a two-dimensional list, the first row is table header.
- span: cell span info. Format: {"[row id],[col id]": {"row":row span, "col":col span }}
type: pin
- input: input spec, same as the item of input_group.inputs
type: scope
- dom_id: the DOM id need to be set to this widget
- contents list: list of output spec
type: scrollable
- contents:
- min_height:
- max_height:
- keep_bottom:
- border:
type: tabs
- tabs:
type: custom_widget
- template:
- data:

pin_value¶

The spec fields of pin_value commands:

name

pin_update¶

The spec fields of pin_update commands:

name
attributes: dist, fields need to be updated

pin_wait¶

The spec fields of pin_wait commands:

names: list,
timeout: int,

pin_onchange¶

set a callback which is invoked when the value of pin widget is changed

The spec fields of pin_onchange commands:

name: string
callback_id: string, if None, not set callback
clear: bool

toast¶

Show a notification message

The spec fields of popup commands:

content
duration
position: 'left' / 'center' / 'right'
color: hexadecimal color value starting with '#'
callback_id

set_env¶

Config the environment of current session.

The spec fields of set_env commands:

title (str)
output_animation (bool)
auto_scroll_bottom (bool)
http_pull_interval (int)
input_panel_fixed (bool)
input_panel_min_height (int)
input_panel_init_height (int)
input_auto_focus (bool)

output_ctl¶

Output control

The spec fields of output_ctl commands:

set_scope: scope name
- container: Specify css selector to the parent scope of target scope.
- position: int, The index where this scope is created in the parent scope.
- if_exist: What to do when the specified scope already exists:
  null: Do nothing
  
  'remove': Remove the old scope first and then create a new one
  
  'clear': Just clear the contents of the old scope, but don’t create a new scope
  
  'blank': Clear the contents of the old scope and keep the height, don’t create a new scope
loose: css selector of the scope, set the scope not to keep the height (i.e., revoke the effect of set_scope(if_exist='blank'))
clear: css selector of the scope need to clear
clear_before
clear_after
clear_range:[,]
scroll_to
- position: top/middle/bottom, Where to place the scope in the visible area of the page
remove: Remove the specified scope

run_script¶

run javascript code in user's browser

The spec fields of run_script commands:

code: str, code
args: dict, Local variables passed to js code
eval: bool, whether to submit the return value of javascript code

download¶

Send file to user

The spec fields of download commands:

name: str, File name when downloading
content: str, File content in base64 encoding.

Event¶

Event is sent by the client to the server. The basic format of event is:

{
    event: event name
    task_id: ""
    data: object/str
}

The data field is the data carried by the event, and its content varies according to the event. The data field of different events is as follows:

input_event¶

Triggered when the form changes

event_name: Current available value is 'blur', which indicates that the input item loses focus
name: name of input item
value: value of input item

note: checkbox and radio do not generate blur events

callback¶

Triggered when the user clicks the button in the page

In the callback event, task_id is the callback_id field of the button; The data of the event is the value of the button that was clicked

from_submit¶

Triggered when the user submits the form

The data of the event is a dict, whose key is the name of the input item, and whose value is the value of the input item.

from_cancel¶

Cancel input form

The data of the event is None

js_yield¶

submit data from js. It's a common event to submit data to backend.

The data of the event is the data need to submit

ایندکس ها و جداول¶

بحث و پشتیبانی¶

هنگام استفاده از PyWebIO نیاز به کمک دارید؟ یک بحث جدید در Github Discussions بسازید.
باگ ها را در GitHub issue گزارش کنید.

Function name	Description
`confirm`	Confirmation modal
`popup_input`	Show a form in popup window
`redirect_stdout`	redirecting stdout to pywebio
`run_shell`	Run command in shell
`put_logbox`, `logbox_append`	Logbox widget
`put_video`	Output video
`put_audio`	Output audio

PyWebIO¶

ویژگی ها¶

نصب¶

سلام، دنیا¶

مستندات¶

راهنمای کاربر¶

ورودی¶

ورودی پایه¶

پارامتر توابع ورودی¶

گروه ورودی¶

خروجی¶

خروجی پایه¶

خروجی ترکیبی¶

فراخوانی کلیک¶

محدوده خروجی¶

چیدمان¶

استایل¶

اجرای اپلیکیشن¶

بررسی اجمالی¶

هم زمان¶

Close of session¶

اطلاعات بیشتر درباره PyWebIO¶

ماژول session¶

ماژول pin¶

ماژول platform¶

ویژگی های پیشرفته¶

آخرین اما نه کم اهمیت ترین¶

pywebio.input --- دریافت ورودی از مرورگر وب¶

لیست توابع¶

مستندات توابع¶

pywebio.output --- ایجاد خروجی به مرورگر وب¶

لیست توابع¶

محدوده خروجی¶

خروجی دادن محتوا¶

تعاملات دیگر¶

چیدمان و استایل¶

pywebio.session --- کنترل بیشتر به نشست¶

pywebio.platform --- دیپلوی کردن اپلیکیشن ها¶

pywebio.pin --- ورودی مداوم¶

بررسی اجمالی¶

ویجت های Pin¶

Pin utils¶

موضوع پیشرفته¶

Start multiple applications with start_server()¶

Integration with web framework¶

Notes¶

Coroutine-based session¶

Using coroutine session¶

Concurrency in coroutine-based sessions¶

Close of session¶

Integration with Web Framework¶

پشتیبانی کتابخانه ها¶

ساخت اپ مستقل¶

بصری سازی داده¶

Bokeh¶

pyecharts¶

plotly¶

pyg2plot¶

cutecharts.py¶

دستور های پخت¶

یادداشت های انتشار¶

What's new in PyWebIO 1.7¶

2022/10/17¶

Highlights¶

تغییرات جزئی¶

رفع باگ¶

What's new in PyWebIO 1.6¶

2022/3/23¶

Highlights¶

تغییرات جزئی¶

رفع باگ¶

v1.6.1 (2022/5/22)¶

v1.6.2 (2022/7/16)¶

موارد جدید در PyWebIO 1.5¶

۱۴۰۰/۰۸/۲۹¶

Highlights¶

تغییرات جزئی¶

رفع باگ¶

v1.5.1 (۱۴۰۰/۰۹/۳۰)¶

v1.5.2 (۱۴۰۰/۱۰/۰۹)¶

ماژول `session`¶

ماژول `pin`¶

ماژول `platform`¶

`pywebio.input` --- دریافت ورودی از مرورگر وب¶

`pywebio.output` --- ایجاد خروجی به مرورگر وب¶

`pywebio.session` --- کنترل بیشتر به نشست¶

`pywebio.platform` --- دیپلوی کردن اپلیکیشن ها¶

`pywebio.pin` --- ورودی مداوم¶

`pywebio_battery` --- PyWebIO battery¶